Products & Services
-
Latest News
Site Wide Search
Select Your Language
Search Results
Pasternack
Pasternack RF coaxial test cables are high frequency assemblies used for various precision and testing applications. There coaxial test cables category consists of 18 GHz test cable assemblies, 26.5 GHz armoured test cable assemblies, 40 GHz armoured test cable assemblies, 165 series non-magnetic cable assemblies (0.165” diameter cable), 150 series cable assemblies (0.150” diameter cable), 095 series cable assemblies (0.095” diameter cable), and break out test cables.
Pasternack coaxial test cables are rated to perform accurately from DC to 65 GHz depending on the style and configuration. Pasternack coaxial RF test cables can be ordered with SMA, N, 3.5mm, 2.92mm, TNC, 1.85mm, 2.4mm, MCX and MMCX connectors. Straight, right angle and bulkhead connector options are available for both male and female versions. There flexible and formable coaxial test cables for RF and microwave can also be purchased with or without a cable jacket.
Radiall
Radiall proudly announces the expansion of the TestPro range to now include TestPro 2 & TestPro 3.
Test cable assemblies are the perfect solution for component/assembly shops, labs, automatic test equipment and test benches requiring durability due to continuous use.
Different from standard cable assemblies, TestPro 2 is specially designed for applications that require repeated connect/disconnect test procedures and the ability to withstand strenuous movement and continuous flexing. This new 50 GHz bench test cable sets the standard for high performance measurement cables, and is the ideal solution for VNAs when flexibility and phase and loss stability is required.
This cost saving solution provides excellent measurement repeatability and an extended life cycle over flexure.
TestPro3-TDS – Technical Data Sheet (368kb)
Test Pro TDS – Technical Data Sheet (387 kb)
Radiall Testpro – Assemblies Catalogue(1 Mb)
Times Microwave
Times Microwave is aworld’s leading high performance cable assemblies manufacturer. They are quite literally involved in just about every military project in the United States & Europe and are renown for their superior expertise, capability & performance in challenging applications.
Aerospace Assembly Catalogue – Miltech, high performance microwave cable assemblies for military electronic warfare systems, commercial aircraft, shipboard and ground based communications systems.
MaxGain Range of fully tested Cable Assemblies designed for Loss Critical performance. The cable is designed to work from DC to 18GHz and uses a revolutionary outer conductor geometry to provide ultra-stable low loss performance. Coupled with a full range of passivated stainless steel connectors these assemblies are ideally suited for applications where lowest loss and good stability with bending is required.
High Power Cables & Assemblies – This range offers Times’s broad range of high power coax cable & assemblies designed for medical (MRI) semiconductor manufacturing equipment, lasers, particle physics experimentation & industrial application.
PhaseTrack™ II Test Cables with Replaceable Connectors – Thermally phase stable cable assemblies for phased arrays, test cables & systems platforms.
PhaseTrack II 0.3MB
PhaseTrack™ 210 Test Cables & Connectors – Thermally stable test cables with removable, interchangeable connectors that experience lowest phase change with temperature fluctuations.
PhaseTrack 210 0.7MB
SiO2 Silicon Dioxide Coaxial Cable Assemblies – Crack-free, low loss glass dielectric & laser welded technology combine to provided unequalled low loss VSWR and hermetic Sealing performance.
SiO2 1.2MB
SFT Coax Connectors & Assemblies – Professional grade test cables and adaptors for testing portable and mobile radios.
Stripflex II 2.7MB
Field Deployable Antenna Feeder Cable Assemblies – LMR R, T-Com R & QEAM™ cables are suited for the rigors of any mobile, portable or temporary field antenna deployment.
Field Deployable 1.4MB
Silverline™ Economical High Performance Test Cables
TuffGrip™ – For wireless system testing, make connections with just one wrench.
TuffGrip 0.7MB
QMA Test Cables – Professional grade test cables & adaptors for testing portable and mobile radios.
QMA Test Cables 1.2MB
L-com Partners with Rojone Pty Ltd in Ingleburn, Australia
PRESS RELEASE
NORTH ANDOVER, MA – 07/22/13 – L-com, Inc., a designer and manufacturer of wired and wireless connectivity products, has reached a distribution partnership agreement with Australian manufacturer and distributor Rojone PTY LTD to sell its wireless connectivity products throughout Australia. L-com’s products will join an impressive range of cabling and wireless brands including Times Microwave, Radiall and Pasternack.
Rojone was formally established in 1981, and has since grown to over sixty dedicated, professional staff in two offices – one in Ingleburn, NSW Australia and one in Perth, Western Australia. Today, Rojone is an ISO 9001:2008 certified designer and manufacturer of many unique products, including its voice interactive GPS vehicle tracking system, and high performance coaxial, fiber optic, and multiconductor cables and connectors, as well as wireless antennas, amplifiers, lightening protectors, splitters and much more.
“Rojone’s commitment to the high-performance of its own brand of products and those it distributes has made them a top supplier to many Australian and New Zealand companies,” said Mark Jaworski, L-com International Sales Manager. “We’re proud to be part of their efforts to meet this growing demand throughout Australia.”
“In partnering with L-com, we will be expanding our offering with many quality and innovative wireless products that are hard to find elsewhere,” said Livia Grabowski, Rojone Managing Director. “These are products our clients need, and we’re ready to supply them.”
Rojone will begin adding select L-com and HyperLink® brand products to its website and product portfolio. L-com has added Rojone to its authorized distributor page and will begin shipping components for stock this month.
For more information about this release, please contact:
Dave Fallon, Internet Marketing Strategist
978-682-6936 x1169, dfallon@l-com.com
L-com, a global designer and manufacturer of wired and wireless connectivity products, offers a wide range of solutions and unmatched customer service for the audio/video, OEM, military/aerospace, IT, and wireless RF industries. The company’s product portfolio includes cable assemblies, connectors, adapters, computer networking components, and custom products, as well as the HyperLink® line of wireless antennas, amplifiers, filters/splitters, lightning protectors, weatherproof enclosures, and much more. Trusted for more than 30 years, L-com, Inc. is headquartered in North Andover, Massachusetts, USA, and is ISO 9001: 2008-certified. For more information, please visit: http://www.L-com.com/
Calibration and Test Kits
1 Watt Calibrated Attenuator Set
Radiall offers a high quality 1 Watt Calibrated Attenator Kit R-414799-125, N Connectors, DC to 18 GHz, 3, 6, 10 and 20 dB, boxed, complete with a certificate of calibration qualifying both Attenaution and VSWR values from DCT to 18 GHz in 1 GHz Steps.
VNA Test Cable Set
Pasternack PE310-KIT VNA Test Cable Set, flexible pair of test cables, 50 Ohm, DC to 26.5GHz, End A 3.5mm NMD Connector, End B interchangeable Connector heads configurable for DUT applications that require Precision 7mm(PC-7), N, 3.5mm, SMA or 2.92mm Connectors.
3.5mm, 26.5GHZ, VNA Calibration Kit
Pasternack’s 3.5mm Standard Calibration kit (PE5500-KIT) is designed for use with a broad range of vector network analyzers (VNAs) that utilize a Short-Open-Load calibration technique. With this kit you can make error-corrected measurements of devices supplied with either 3.5mm or SMA connectors from DC to 26.5 GHz. This kit contains both Male (Plug) and Female (Jack) connector interfaces to perform full Two-Port error corrections.
Features include: Broad VNA Coverage, including Agilent & Anritsu, Open, Short, Fixed Broadband Load Configurations, DC to 26.5 GHz & In-Series Phase Matched Adapters available.
Type N, 18GHz VNA Calibration Kit
Pasternack’s vector network analyzer calibration kit with N-Type connectors (PE5501-KIT) is designed to calibrate a broad range of VNA models. VNA
calibration kit is designed for equipment that utilizes a short open load calibration technique. With this N type vector network analyzer calibration kit, you can make error corrected measurements of test devices supplied with N type connectors from DC to 18 GHz.
The Pasternack vector network analyzer calibration kit contains both male plug and female jack N connector interfaces. Using this VNA calibration kit from Pasternack Enterprises you can perform full two port error corrections.
Vector Network Analyzer Calibration Kit Features: Broad VNA Coverage, Including Agilent & Anritsu, Open, Short, Fixed Broadband Load Configurations, DC to 18 GHz VNA Calibration Kit Range with In-Series Phase Matched Adapters available.
Open & Short Circuits
Pasternack has an excellent range of Male and Female Open Circuits together with a selection of Male and female Short circuits for test applications.
RF Testing & Calibration Accessories
In addition, as part of Pasternack’s off the shelf range, they offer broadband male and female test loads.
3 Port Field Calibration Tool
Pasternack’s 3 port calibration tool can make error corrected measurements of devices supplied with 3.5mm connectors. Also called “Bones”, this calibration tool is very effective when needing to make instrument calibrations. Pasternack 3.5mm female 3 port calibration tool is great for the field because it is lightweight and portable.
Our 3 port tool for calibration has female (jack) connector interfaces to perform short, open, and load measurements on the device you are evaluating. PE5510 calibrator tool for the field is fully compatible with Anritsu SiteMaster™ analyzer and other handheld cable and antenna analyzers.
PE5510 – 3.5mm Female, DC to 26.5 GHz
PE5511 – 3.5mm Male, DC to 26.5 GHz
PE5512 – N Female, 50 Ohms, DC to 6 GHz
PE5513 – N Male, 50 Ohms, DC to 6 GHz
PE5514 – 7/16 Female, 50 Ohm, DC to 6 GHz
PE5515 – 7/16 Male, 50 Ohms, DC to 6 GHz
.
Coaxial Assemblies
Presentations
Rojone has been manufacturing and selling high quality RF & microwave coaxial cable assemblies since 1981. We offer a comprehensive range of locally manufactured assemblies with an excellent range of high performance, low loss, extreme & military application products from Times Microwave USA and Radiall France.
Brands & Products
Rojone Assemblies
Rojone Cable Assembly catalogue (1.5 MB)
Our Production is equipped with the latest test instruments, Vector Network & Spectrum Analysers (HP8720D, HP8753B, 8495E), a Thermoline Thermal Chamber for temperature cycling cables, auxiliary items such as precision Schleuniger 207 and their latest CS5400 cable stripping machines, inspection microscopes, pin depth gauges and automated test software.
Times Microwave
TMS are the experts in their field with high performance RF & Microwave assemblies for the harshest of military, civil & test applications.
- SilverLine – Low Cost Flexible high performance Test Cables.
- Miltech – Extreme Environments hermetically sealed, low loss, low VSWR, phase stable and light weight options for airborne applications.
- Zero-DB – Zero Loss, integrated LNA for critical aircraft applications.
- SiO2 – Silicon Dioxide Extreme Environment military assemblies.
- Military Tactical Field Deployable Antenna Feeder cables – Designed to withstand the riggors of repeated reeling for harsh Environments.
- Heli-Foil – Low Loss High Performance Microwave Coaxial assemblies.
Radiall
Radiall offers a specialized range of RF & Microwave coaxial & multipin cable assemblies:
- Corrugate
- Flexible RG, KX, ECO, ECOX, LMR
- Flexible Ultra-Low Loss SHF
- Hand-Formable
- Semi-Rigid
- Space Qualified
- TestPro Bench Test
Pasternack
Pasternack offer an excellent commercial range of:
- Coaxial cable assemblies
- Patch Cords covering banana leads, alligator and spade leads
- Fibre Optic assemblies
L-com
L-com produces a range of High Performance Armoured Cable Assemblies that feature a stainless Steel Flexible Jacket. Built around a low loss coax cable that works to a range to 10 GHz, they are designed for use in the following applications;
- Harsh industrial environment
- High traffic production test systems
- Installations susceptible to rodent damage
Installation Accessories
Rojone manufactures and represents a number of supporting accessories for its 
cable, connector and antenna range.
.
Weather Sealing Kit
Times Microwave’s Self-Bonding Silicone Tape is a cost effective, labour saving alternative to traditional Vinyl Mastic and Butyl Rubber sealing kits.
TC-WK-S-1 – Self-Bonding Silicone Tape (5 metres)
Self Amalgamating Tape
Scapa Self amalgamating tapes are rubber based, extremely versatile materials that are non-tacky making them very easy to use and apply. Moisture protection and electrical insulation for various applications in addition to acting as protection against corrosion on joints and welds.
HE-23-19 – Scotch 23 Rubber Self Bonding Electrical Tape (19mm)
HE-23-25 – Scotch 23 Rubber Self Bonding Electrical Tape (25mm)
HE-33-19 – Scotch Brand Super 33+ All Weather Vinyl Insulating Tape (19mm)
Stainless Steel Braiding (Armour)
AISI 304 Stainless Steel wire thatched braid, from 7mm to 300mm circular bore, various wire thicknesses, lengths available up to 100mtrs.
Heatshrink Moulded Shapes
Heat Shrinkable Moulded Shapes, Endcaps and breakouts, adhesive lined and unlined. 2-way up to 6-way Outlet Shapes. 90° and 45° angle boots, Transitions, Y-outlets, VG-style shapes. End caps and breakouts for low voltage applications, two component epoxy adhesive and hot melt adhesive tape.
Non Shrinkable – Tubing
Insulation tubing and sleeving, made from Chloroprene (CR), Polyvinylchloride (PVC), Polyolefin (PO), Polytetrafluoroethylene (PTFE) or Silicone (SI) as well as Hellerine lubricating oil for rubber and plastic sleeves.
Cable Ties & Fixings
HE-Series Cable Ties – Available in High Yield Strength PA66 Plastic and 316 Grade Stainless Steel.
 |
Cable Ties Inside Serrated – Plastic cable ties are suitable for bundling and fixing of cables, lines and hoses. Available in different remarks, materials, lengths and colours. |
 |
Cable Ties Outside Serrated – Outside serrated cable ties are particularly suitable for bundling and fixing of sensitive bundle property. Available in different remarks, materials, lengths and colours. |
 |
Releasable Cable Ties – Releasable cable ties can be processed and offered very simply. They are an optimal solution for temporary fixings. Available in different remarks, materials, lengths and colours. |
 |
Cable Ties without serration – The robust cable ties without serration of the KR- and EL-TY-Series offer a high retaining strength and are suitable for cables and lines with large diameters. |
 |
Cable Ties for Direct Fixation – Cable ties for direct fixing are characterised by simple handling to bundling and fixing of cables and lines in a processing step. |
 |
Stainless Steel Cable Ties – Stainless steel cable ties can be used in the most arduous of conditions or where additional strength, security and fire resistance is required. |
 |
Fixing Ties – Optimal fixing solutions for each cause offer the fixing ties in different remarks, materials, lengths and colours. |
 |
Cable Tie Mounts – Cable Tie Mounts are available in either screw or self-adhesive mounting. Different sizes and designs offer a secure fixing with a wide variety of cable ties. |
 |
Fixing Elements – A wide variety of fixing elements offer a direct fixation in holes of a panel or at the edges. |
 |
Clips and Clamps – A multiplicity of clips and clamps of plastic, aluminium or steel also with protection profile. Snappers and Klam clips. |
Semi-Rigid Cable Assemblies
Rojone has been one of Australia’s leading Coaxial Cable assembly manufacturers for over 30 years. The arrival of our new CNC Bending machine has significantly increased our capability to produce volume, state-of-the-art semi-rigid cable assemblies and delay lines suitable for microwave, military, RF, and telecommunications applications to 18GHz.
-
- CNC Bending Machine
Semi-rigid coax cable assemblies are typically used in ground and airborne radar systems, satellite and terrestrial wireless communications equipment, high bandwidth data communication equipment, medical imaging apparatus, test equipment, electronic warfare and to connect to microwave antennas.
As communications bandwidth and imaging resolution increase, higher frequencies, power handling & shielding are very important factors. These applications require excellent durability, phase stable performance, low attenuation, high signal fidelity and the ability to handle more power. Semi-rigid coax meets these requirements and is ideal for high temperature, high power applications while maintaining excellent phase stable performance and minimising VSWR. Semi rigid is especially significant in tactical environments where high shielding and shock or vibration tolerance is critical.
Rojone offers .047, .086, .141 and .250 inch diameter cables, bare copper, tin-plated copper and aluminum sheath which is 30% less weight than copper jacket, all terminated to high performance SMA, APC, N, BMA & more RF Coaxial connectors by IPC 620 Certified Technicians.
All assemblies are 100% tested; sweep testing is also available to ensure identical electrical properties for each assembly. We would also high recommend all cables are temperature cycled through our environmental chamber, depending on your specifications; this normalise the cable dielectric ensuring optimum performance and overall stability.
Hand forming semi-rigid assemblies is definitely a skill; only the most talented technicians are used to create these unique high performance assemblies. While this process is used by most small to medium production facilities, the technique is really only suitable & cost effective for low volume prototyping or production. With this in mind, Rojone decided that it was time to increase its capabilities & competitive edge by investing in CNC Automated equipment to produce volume, high performance Semi-Rigid Assemblies that are internationally price competitive.
Rojone’s new RD5 CNC Bender is impressive. It produces 3 axis bends fast, accurately and repeatably directly from customer’s CAD or STEP files, using the full range of qualified Mil-C17 semi-rigid coax cables.
The RD5 bends semi-rigid cable using a rotary wipe process. This technique has proven to be the gentlest bending technique on the semi-rigid cable providing for excellent signal transmission when the cable is in its final assembly. The collet closer that holds the coax during the bending process is designed specifically to grip yet be gentle on the cables outside jacket. The design of the carriage spindle allows the end of the coax cable to get right up next to the bend tooling on the very last bend. This often translates into avoiding a trimming operation after bending.
http://www.youtube.com/watch?v=X_5VF80eOKQ
http://www.youtube.com/watch?v=K9py9mOscyk
In addition to the CNC Bender, we also purchased an AM40 digital protractor designed to measure the bend angle of small tubing/semi-rigid coax & sheet metal. Its measuring range is from 0 to 360 degrees in increments of 0.1 degrees. It uses a high-resolution encoder to ensure the repeatability of the bend angle measurement. The digital readout, displayed in large numerals, updates continuously to show the real-time bend angle. This tool is ideal for measuring the first semi-rigid assembly run off the CNC, to ensure that the programming is spot on and more importantly to adjust the program to compensate for any spring back resulting from different cable batches.
http://www.youtube.com/watch?v=fSWICUPhpQA
Design guidelines for Semi-Rigid Assemblies:
- Employ a single common bend radius.
- Avoid the cable minimum bend radius for improved electrical performance.
- Define cable assembly “ends” with respect to the connector reference plane in lieu of the physical end of the connector. In the case of right angle connectors, utilise the connector centre-line.
- Avoid specifying specific vendor part numbers for connectors unless absolutely necessary.
- Specify electrical performance testing only in bands of interest and only for critical performance tests. Excess electrical testing, while nice, also becomes expensive.
- Where possible, do not design bends-on-bends. A design tool may allow this, but it often proves difficult to realise practically.
- If designing a phase matched assembly, be sure to consider “forming areas”. These are “open” areas in the system that allow the “take-up of variations in cable length as a result of phase matching.
- Specify thermal-conditioning only when necessary. Usually this is only needed for phase sensitive applications as this has a cost impact.
With over 30 year of coaxial experience, the team at Rojone are confident in our ability to offer our clients design, drafting & prototyping assistance for any prospective assembly requirement and we are ultimately your competitive partner when it comes time to manufacture.
New SilverLine-LP (Low PIM) Test Cables now available
SilverLine-LP is a flexible, armoured, low PIM test lead for cell site field test or high volume production testing of PIM sensitive components such as cell tower antennas.
Part number SLSLP03-76M76M-02.75MK is 2.75m long and is equipped with 7-16 low PIM male connectors. A massive armor casing and connector back shells ensure durability in the field or on the production floor.
Each cable comes as a kit that includes a set of three low PIM adaptors (7-16 female bullet, 7-16 right angle, and 7-16 male/female straight connector saver) in a heavy duty protective case.
Accessories purchased separately include Times part number 67020 bench PIM load or part number 67019 portable PIM load. Each is capable of constant, full power handling without burning out.
New Lightning & Surge Protector Products Launched
Rojone Partner Times Microwave Systems has announced two new products within their Times Protect™ line of Lightning & Surge Protectors.
LP-GPX-05-T Series
The LP-GPX-05-T high performance series is an exceptional DC pass design for protection of GPS receivers requiring up to 5Vdc power to be supplied on the center pin. While the RF path is DC blocked, the biased DC voltage protection circuit uses Solid State protection technology to provide unsurpassed surge performance.
The LP-GPX-05-T series offers outstanding Insertion Loss and Return Loss characteristics over the 1000-2000MHz band, making it suitable for protection of commercial and military GPS, as well as other applications in this band.
Unlike competitive protectors, the white bronze plated construction of the LP-GPX-05-T series eliminates potential galvanic corrosion issues and provides long life in hostile environments. The fully weatherised housing is sealed to IP65 allowing for outdoor as well as indoor installation.
LP-GPX-05-T Series:
- LP-GPX-05-TFF – TNC Female connectors on surge and protected sides – bidirectional
- LP-GPX-05-TFM – TNC Male connector on one side & TNC Female connector on the other side – bidirectional
LP-BTRW Series
The Times Protect™ LP-BTRW high performance surge arrestor series addresses applications in the 20MHz-1000MHz spectrum. Unique DC blocking technology employed in this design provides optimum isolation of the antenna port from the protected equipment port for maximum surge protection. LP-BTRW surge protectors have exceptional RF performance and are constructed from the highest quality materials for unsurpassed durability and longevity. These units meet and surpass all applicable industry standards. The LP-BTRW product family is available with N connector configurations and fully weatherised to the IP67 standard for outdoor use.
LP-BTRW Series:
- LP-BTRW-NFF – N Female connectors on surge and protected sides
- LP-BTRW-NMP – N Male connector on protected side with N Female connector on surge side
- LP-BTRW-NMS – N Male connector on surge side with N Female connector on protected side
Download the product information brochures from Times Microwave at:
http://www.timesmicrowave.com/downloads/products/LP-GPX-05-T.pdf
http://www.timesmicrowave.com/products/protect/downloads/BTRW.pdf
Radiall
Radiall was founded in 1952 as a family-owned company making coaxial plugs for the television industry. Today, Radiall is an international and global manufacturer of interconnect components including RF coaxial connectors and cable assemblies, antennas, fibre optic and microwave components, and multipin connectors. Radiall serves the Aerospace, Automotive, Defense, Industrial, Medical, Space, and Telecommunication industries.
The innovating solutions integrator for today and for tomorrow.
Our expertise in interconnect technologies and our intimate market knowledge establish us as a key player in the industries we serve.
“Be the best and work for the best”, Pierre GATTAZ, CEO
Worldwide engineering & manufacturing capability.
With expertise centres and manufacturing locations on 3 continents and 12 industrial sites, Radiall offers its customers the proximity needed to provide the best quality, service and delivery performance.
Our facilities feature state of the art equipment for the many technologies involved in the design, manufacturing and assembly of interconnect solutions. Manufacturing plants based in low-cost countries give Radiall the opportunity to offer quality at competitive prices.
Radiall Product Line Brochure 2021
- A comprehensive range of RF connectors up to 100 GHz
- All standard series: SMA, SMP, SMPM, N, TNC, SMB, SMC, SSMC, MMCX, MCX, BNC
- Blind mate: SMP, SMPM, SMPW, BMA
- High-frequency precision connectors for test: 2.4 mm, SMA 2.9, TNC18
- High-power antenna, low PIM connectors: NEX10, 4.3-10, 4.1-9.5, 7-16
- High voltage connectors: BNC HV/MHV, HN, SHVLocking connectors: SMP-LOCK, SMB-LOCK, TNC Self-lock, SMA 2.9 Self-lock
- MIL-PRF-39012 QPL connectors
- Quick-Lock Formula (QLF) certified QMA and QN, and ruggedized version QRE
- RF Board-to-Board interconnects: SMP-MAX, IMP-MAX, POWER-MAX, IMP, MMBX
- Switching connectors: Moebius, MC-Card, SMA, QN
- Waterproof, stainless steel, lightweight, hermetic and nonmagnetic connectors available
- A comprehensive range of space-qualified coaxial components up to 50 GHz
- Large connector interface selection: SMP, SMP-LOCK, 2.4 mm, SMA, SMA 2.9, TNC and Very High Power TNC
- Various products are available for RF transmission in space including switches, connectors, attenuators,
loads, semi-rigid and low loss flexible cable assemblies, couplers, dividers and phase shifters
- A comprehensive range of components up to 50 GHz
- Type N, BNC, TNC, SMA, SMA 3.5, SMA 2.9, 2.4 mm
- Medium and high power terminations and attenuators up to 6 GHz and 1 kW
- Power dividers/combiners up to 26.5 GHz
- Rotary joints, phase shifters
- Low PIM models
- Microwave filters
- Large selection of in-series and between-series
- 50 and 75 Ohm
- Push-on and quick-disconnect models for production test
- Precision adapters for test lab
- Many configurations available: straight, bulkhead, flange mount, press in, right angle, sealed, hermetic
Standard Cable Assemblies
Proprietary Cable Assemblies
- Short-bend
- SHF Ultra Low Loss
- Loss optimized up to 67 GHz
- Phase matching option
- Armoured, lightweight and airframe versions
- Custom cable assemblies and lengths are available
- High-reliability RAMSES patented modular technology
- More than 10 million cycles
- Frequency range up to 50 GHz
- A comprehensive range of SPDT, DPDT, DP3T, SPnT (1×3 through 1×12)
- Terminated and unterminated versions
- Smallest subminiature SPnT series
- TVAC switches (Thermal Vacuum) for ground segment application
- High-performance titanium and platinum switches with long life
- VNA TestPro grade 40, 50 and 67 GHz
- Lab TestPro grade 18, 26.5, 40, 50 and 67 GHz
- Low Loss TestPro
- 5,000 mating/unmating life cycles
- Flex life: over 50,000 flex cycles per MIL IEC966-1
- Phase and loss stability for long calibration intervals
- Manpack, vehicle and handheld radios
- UAV/UGV2 and other sensors
- Airborne, onboard and external
- Antenna frequency: 30 MHz and up
- Single, dual and multi-band, external or embedded
- Active and passive GPS (L1 and L1/L2)
- Overmolded, whip, patch printed
- N-type, TNC, SMA and speciality connectors
Optical Interconnect Solutions
- Test Ruggedized FO contacts: LuxCis®
- ARINC 801/EN4639-101 with its expandable range of rectangular and circular connectors
- ABS1379/EN4531-101 optical contacts
- High-density MT-based interconnects for harsh environments: C-MTitan™ and Q-MTitan™ ARINC 846
- Various Expanded Beam solutions:
- ExoBeam™ tactical cable assemblies, EB-LuxCis®
- Ruggedized simplex and duplex LC, SC and ST connectors
Full Cable Assemblies and Harnesses
- Simplex and multichannel assemblies designed by Radiall or built-to-print
- Synergy with active optics from D-Lightsys®
- Fibre management accessories
- Field kits, test and maintenance solutions and training
- OCTIS™: robust I/O solution for outdoor small cell and next-generation RRU/RRH
- Lightning and EMI protection
- SFP/SFP+ transceiver integration, RJ45 for CAT 5E or CAT 6 Ethernet signal, power (AC/DC), signal, hybrid of power and signal
- R2CT®: flexible outdoor solution for FTTA and wireless telecom applications
- RXF: two and four-channel outdoor optical connector
- OPUS: push-pull compact solution for fibre optic and coaxial outdoor links
- 2 mm, 4 mm and adapters
- Excellent electrical conductivity
- Very low contact resistance
- Robust contact point pressure when connected
- Outstanding durability for high number of mating cycles
- Complete range of high-performance optoelectronic Active Optics by D-Lightsys®
- Fully qualified for harsh environments: DO-160; MIL-STD; ARINC 804
- Smallest form factor for single-channel and multichannel modules (6.5 mm2/ch/Gbps)
- Lowest power consumption (<50 mW/ch Gbps)
- Protocol independent and large bandwidth per channel (from DC to 10 Gbps)
- Various packages and form factors available (LCC, Socketed, SFF, others)
- Flying since 2007
Multipin Industrial Connectors
For use in railway and other industrial applications
Circular Connectors Derived from MIL-STD-5015 VG95234
| Industrial | Railway | Description |
|---|---|---|
| KVBS | RF KVBS | Thermoplastic insert. Insulation according to NFF 61030 |
| CVB | RF CVB | Reverse bayonet, faster coupling and anti-vibration |
| CVBS | RF CVBS | Bayonet protected by stainless steel stud, heavy-duty |
| CVBR | RF CVBR | Coupling nut with roller-stud, higher number of mating cycles |
| GVJ | RF GVJ | Reverse bayonet, oversized shell, more robust |
| CVS | RF CVS | Threaded connectors |
| CT | RF CT | Reverse bayonet derived from MIL-C-26482 Series 1 |
| Series | Description |
|---|---|
| GM | Modular connectors system |
| GMM | Modules are available for many different applications: Ethernet data, RF coaxial, fibre optic, power, signals up to 14 wires |
| GMH | Modular connectors system with handle |
Data Transmission Connectors
- Bayonet Ethernet connector, vibration and shock-resistant
- Materials and finishes compliant with the requirements for railway applications
| Industrial | Railway | Description |
|---|---|---|
| EVBS C7 | RF EVBS C7 | Ruggedized CAT 7, CAT 6A data connectors |
| EVBS | RF EVBS | Ruggedized CAT 5, CAT 5E and CAT 6 data connectors |
- Can be used in hazardous and potentially explosive environments
- Oil and gas, mining and power plant industries
- Certification: 94/9/EC ATEX directive
| Industrial | Description |
|---|---|
| CVBEX | Explosion-proof bayonet connector according to EN 60079-0/-1 and EN 61241-0 / -1 |
Data Line Surge Protectors
Times Microwave Systems has recently introduced a new range of Data Line Surge Protectors. These products offer a unmatched level of data integrity and over-voltage protection, the LP-DOE-1G, LP-POE-1G and LP-PAE-100 Data Line surge protection devices are the newest additions to the Times-Protect® product family. Proprietary circuitry results in surge let-through voltage on data lines of less than 20V peak at 3kA 8x20uS surge test current and less than 10V peak at 100A 10x1000uS surge test current, while complying with extended RFC2544 test methods for data integrity. These extremely difficult tests are conducted on two protection devices separated by 100 meters of Cat 5e cable over a broad temperature range measuring these parameters:
Items available:
- LP-DOE-1G 1000 BASE-T ETHERNET DATA ONLY – 1000 Base-T / Indoor application with all data pin protected to chassis ground
- LP-POE-1G 1000 BASE-T POWER OVER ETHERNET – Power Over Ethernet, 1000 Base-T with up to 60Vdc injector. All pin pairs protected to chassis ground
- LP-PAE-100 100 BASE-T POWER AND ETHERNET – 00 Base-T with all pins protected to ground. Data pin pairs are (1-2) (3-6) and DC pin pairs are (4-5) (7-8)
The RFC2544 test results for each of these outstanding devices are available for download on the Times Microwave Systems website.
Enhanced RFC 2544 Test