Search Results
Pasternack
Pasternack RF coaxial test cables are high frequency assemblies used for various precision and testing applications. There coaxial test cables category consists of 18 GHz test cable assemblies, 26.5 GHz armoured test cable assemblies, 40 GHz armoured test cable assemblies, 165 series non-magnetic cable assemblies (0.165” diameter cable), 150 series cable assemblies (0.150” diameter cable), 095 series cable assemblies (0.095” diameter cable), and break out test cables.
Pasternack coaxial test cables are rated to perform accurately from DC to 65 GHz depending on the style and configuration. Pasternack coaxial RF test cables can be ordered with SMA, N, 3.5mm, 2.92mm, TNC, 1.85mm, 2.4mm, MCX and MMCX connectors. Straight, right angle and bulkhead connector options are available for both male and female versions. There flexible and formable coaxial test cables for RF and microwave can also be purchased with or without a cable jacket.
Radiall
Radiall proudly announces the expansion of the TestPro range to now include TestPro 2 & TestPro 3.
Test cable assemblies are the perfect solution for component/assembly shops, labs, automatic test equipment and test benches requiring durability due to continuous use.
Different from standard cable assemblies, TestPro 2 is specially designed for applications that require repeated connect/disconnect test procedures and the ability to withstand strenuous movement and continuous flexing. This new 50 GHz bench test cable sets the standard for high performance measurement cables, and is the ideal solution for VNAs when flexibility and phase and loss stability is required.
This cost saving solution provides excellent measurement repeatability and an extended life cycle over flexure.
TestPro3-TDS – Technical Data Sheet (368kb)
Test Pro TDS – Technical Data Sheet (387 kb)
Radiall Testpro – Assemblies Catalogue(1 Mb)
Times Microwave
Times Microwave is aworld’s leading high performance cable assemblies manufacturer. They are quite literally involved in just about every military project in the United States & Europe and are renown for their superior expertise, capability & performance in challenging applications.
Aerospace Assembly Catalogue – Miltech, high performance microwave cable assemblies for military electronic warfare systems, commercial aircraft, shipboard and ground based communications systems.
MaxGain Range of fully tested Cable Assemblies designed for Loss Critical performance. The cable is designed to work from DC to 18GHz and uses a revolutionary outer conductor geometry to provide ultra-stable low loss performance. Coupled with a full range of passivated stainless steel connectors these assemblies are ideally suited for applications where lowest loss and good stability with bending is required.
High Power Cables & Assemblies – This range offers Times’s broad range of high power coax cable & assemblies designed for medical (MRI) semiconductor manufacturing equipment, lasers, particle physics experimentation & industrial application.
PhaseTrack™ II Test Cables with Replaceable Connectors – Thermally phase stable cable assemblies for phased arrays, test cables & systems platforms.
PhaseTrack II 0.3MB
PhaseTrack™ 210 Test Cables & Connectors – Thermally stable test cables with removable, interchangeable connectors that experience lowest phase change with temperature fluctuations.
PhaseTrack 210 0.7MB
SiO2 Silicon Dioxide Coaxial Cable Assemblies – Crack-free, low loss glass dielectric & laser welded technology combine to provided unequalled low loss VSWR and hermetic Sealing performance.
SiO2 1.2MB
SFT Coax Connectors & Assemblies – Professional grade test cables and adaptors for testing portable and mobile radios.
Stripflex II 2.7MB
Field Deployable Antenna Feeder Cable Assemblies – LMR R, T-Com R & QEAM™ cables are suited for the rigors of any mobile, portable or temporary field antenna deployment.
Field Deployable 1.4MB
Silverline™ Economical High Performance Test Cables
TuffGrip™ – For wireless system testing, make connections with just one wrench.
TuffGrip 0.7MB
QMA Test Cables – Professional grade test cables & adaptors for testing portable and mobile radios.
QMA Test Cables 1.2MB
L-com Partners with Rojone Pty Ltd in Ingleburn, Australia
PRESS RELEASE
NORTH ANDOVER, MA – 07/22/13 – L-com, Inc., a designer and manufacturer of wired and wireless connectivity products, has reached a distribution partnership agreement with Australian manufacturer and distributor Rojone PTY LTD to sell its wireless connectivity products throughout Australia. L-com’s products will join an impressive range of cabling and wireless brands including Times Microwave, Radiall and Pasternack.
Rojone was formally established in 1981, and has since grown to over sixty dedicated, professional staff in two offices – one in Ingleburn, NSW Australia and one in Perth, Western Australia. Today, Rojone is an ISO 9001:2008 certified designer and manufacturer of many unique products, including its voice interactive GPS vehicle tracking system, and high performance coaxial, fiber optic, and multiconductor cables and connectors, as well as wireless antennas, amplifiers, lightening protectors, splitters and much more.
“Rojone’s commitment to the high-performance of its own brand of products and those it distributes has made them a top supplier to many Australian and New Zealand companies,” said Mark Jaworski, L-com International Sales Manager. “We’re proud to be part of their efforts to meet this growing demand throughout Australia.”
“In partnering with L-com, we will be expanding our offering with many quality and innovative wireless products that are hard to find elsewhere,” said Livia Grabowski, Rojone Managing Director. “These are products our clients need, and we’re ready to supply them.”
Rojone will begin adding select L-com and HyperLink® brand products to its website and product portfolio. L-com has added Rojone to its authorized distributor page and will begin shipping components for stock this month.
For more information about this release, please contact:
Dave Fallon, Internet Marketing Strategist
978-682-6936 x1169, dfallon@l-com.com
L-com, a global designer and manufacturer of wired and wireless connectivity products, offers a wide range of solutions and unmatched customer service for the audio/video, OEM, military/aerospace, IT, and wireless RF industries. The company’s product portfolio includes cable assemblies, connectors, adapters, computer networking components, and custom products, as well as the HyperLink® line of wireless antennas, amplifiers, filters/splitters, lightning protectors, weatherproof enclosures, and much more. Trusted for more than 30 years, L-com, Inc. is headquartered in North Andover, Massachusetts, USA, and is ISO 9001: 2008-certified. For more information, please visit: http://www.L-com.com/
Calibration and Test Kits
1 Watt Calibrated Attenuator Set
Radiall offers a high quality 1 Watt Calibrated Attenator Kit R-414799-125, N Connectors, DC to 18 GHz, 3, 6, 10 and 20 dB, boxed, complete with a certificate of calibration qualifying both Attenaution and VSWR values from DCT to 18 GHz in 1 GHz Steps.
Pasternack PE310-KIT VNA Test Cable Set, flexible pair of test cables, 50 Ohm, DC to 26.5GHz, End A 3.5mm NMD Connector, End B interchangeable Connector heads configurable for DUT applications that require Precision 7mm(PC-7), N, 3.5mm, SMA or 2.92mm Connectors.
3.5mm, 26.5GHZ, VNA Calibration Kit
Pasternack’s 3.5mm Standard Calibration kit (PE5500-KIT) is designed for use with a broad range of vector network analyzers (VNAs) that utilize a Short-Open-Load calibration technique. With this kit you can make error-corrected measurements of devices supplied with either 3.5mm or SMA connectors from DC to 26.5 GHz. This kit contains both Male (Plug) and Female (Jack) connector interfaces to perform full Two-Port error corrections.
Features include: Broad VNA Coverage, including Agilent & Anritsu, Open, Short, Fixed Broadband Load Configurations, DC to 26.5 GHz & In-Series Phase Matched Adapters available.
Type N, 18GHz VNA Calibration Kit
Pasternack’s vector network analyzer calibration kit with N-Type connectors (PE5501-KIT) is designed to calibrate a broad range of VNA models. VNA
calibration kit is designed for equipment that utilizes a short open load calibration technique. With this N type vector network analyzer calibration kit, you can make error corrected measurements of test devices supplied with N type connectors from DC to 18 GHz.
The Pasternack vector network analyzer calibration kit contains both male plug and female jack N connector interfaces. Using this VNA calibration kit from Pasternack Enterprises you can perform full two port error corrections.
Vector Network Analyzer Calibration Kit Features: Broad VNA Coverage, Including Agilent & Anritsu, Open, Short, Fixed Broadband Load Configurations, DC to 18 GHz VNA Calibration Kit Range with In-Series Phase Matched Adapters available.
Open & Short Circuits
Pasternack has an excellent range of Male and Female Open Circuits together with a selection of Male and female Short circuits for test applications.
RF Testing & Calibration Accessories
In addition, as part of Pasternack’s off the shelf range, they offer broadband male and female test loads.
Pasternack’s 3 port calibration tool can make error corrected measurements of devices supplied with 3.5mm connectors. Also called “Bones”, this calibration tool is very effective when needing to make instrument calibrations. Pasternack 3.5mm female 3 port calibration tool is great for the field because it is lightweight and portable.
Our 3 port tool for calibration has female (jack) connector interfaces to perform short, open, and load measurements on the device you are evaluating. PE5510 calibrator tool for the field is fully compatible with Anritsu SiteMaster™ analyzer and other handheld cable and antenna analyzers.
PE5510 – 3.5mm Female, DC to 26.5 GHz
PE5511 – 3.5mm Male, DC to 26.5 GHz
PE5512 – N Female, 50 Ohms, DC to 6 GHz
PE5513 – N Male, 50 Ohms, DC to 6 GHz
PE5514 – 7/16 Female, 50 Ohm, DC to 6 GHz
PE5515 – 7/16 Male, 50 Ohms, DC to 6 GHz
.
New Prep Tool for LMR-500 Low Loss Coaxial Cables from Times Microwave
Times Microwave Systems has recently introduced the new CST-500 All-In-One Combination Prep Tool for use with LMR-500 low loss coaxial cables. The new tool provides the following features and advantages:
– Combination feature allows preparation of LMR-500 cables for either crimp or clamp connector attachment
– Suitable for use with all LMR-500 connectors
– Provides consistently sharp cut of dielectric for best VSWR performance
– Includes a built-In debur tool eliminating the need for a separate debur tool
– Rugged, lightweight construction
– Lanyard attachment included
Low Smoke Zero Halogen – LMR Cable
Times Microwave represented by Rojone in Australia is pleased to introduce LMR- LSZH (Low Smoke Zero Halogen LMR Cable), as a lower
cost alternative to LMR-FR cables when CMR rate is not required.
Advanced features and benefits:
- Low Smoke Low Toxicity Non-halogen
- Flame: Meets IEC-332-1-2, IEC 332-3 CAT.C, UL-VW1, UL-1581, IEE-383, BS-
4066-1, BS-4066-3, UL-1685, NFPA-130 - Smoke: Meets IEC-61034-2, NES-711
- Halogen: Meets IEC-60754-1, BS 6425-1, IEC-60754-2, BS 6425-2
- UV Resistant: Meets UL-1581, 720 Hour UV Exposure
- Non-UL Listed Cable
- LMR connector, install tools and hardware accessories can be directly used
Size | Drawing No | MI Number | Order Code | |
---|---|---|---|---|
195 | 11761 | 54387 | LMR-195-LSZH | Datasheet |
200 | 11762 | 54388 | LMR-200-LHZH | Datasheet |
240 | 11763 | 54389 | LMR-240-LSZH | Datasheet |
240 | 11827 | 54397 | LMR-240-75-LSZH | Datasheet |
400 | 11764 | 54390 | LMR-400-LSZH | Datasheet |
400 | 11828 | 54398 | LMR-400-75-LSZH | Datasheet |
500 | 11765 | 54391 | LMR-500-LSZH | Datasheet |
600 | 11766 | 54392 | LMR-600-LSZH | Datasheet |
600 | 11829 | 54399 | LMR-600-75-LSHZ | Datasheet |
Times Microwave Systems specialises in the design & manufacture of high performance flexible, Low Loss, semi-rigid & standard coaxial M17 cable, for RF transmission from HF through Microwave frequencies DC to 46GHz.
What is LMR Cable? Times LMR Cables are high performance, broadband, flexible, low loss 50 and 75 Ohm coaxial communications cables designed for use in wireless applications such as;
2 way land mobile, IEEE<802.11a & 802.11b, Cellular, Wireless local loop, PCS, LMDS, Wireless Internet (WISP), MMDS, Broadband wireless data, CLEC, Telemetry, Paging, and many more.
LMR is a complete system of cables, connectors, installation tools & accessories – everything you need to make your job simple and successful.
What is the advantage of LMR? Times LMR cables have RF performance comparable to traditional corrugated copper cables, but unlike corrugated cables, LMR is highly flexible, non-kinking and offers unsurpassed ease and speed of connection installation. Compared to RG type braided cables, LMR offers far lower loss & better RF Shielding.
Are the LMR Series Cables exclusive to Times Microwave? Yes. LMR is a registered Trademark of Times Microwave. The LMR Series is a family of high quality communications cables & accessories designed and manufactured by Times Microwave USA.
Times Microwave manufactures high quality products; all cables are maked with the company brand, LMR trademark and code. Please be aware of inferior imitation cables and assemblies sold unlawfully as LMR series products.
Times Microwave has exclusively appointed Rojone its Australian agent, with their full support . We are the authorised stockist for their LMR series Low Loss cables, accessories & Military coaxial cable & assembly range.
LMR Standard Cable Codes
LMR 100A OD=0.110 inches, 2.79 mm
LMR 195 OD=0.195 inches, 4.95 mm
LMR 240 OD=0.240 inches, 6.10 mm
LMR 400 OD=0.405 inches, 10.29 mm
LMR 600 OD=0.590 inches, 14.99 mm
LMR 900 OD=0.870 inches, 22.10 mm
LMR 1200 OD=1.200 inches, 30.48mm
LMR 1700 OD=1.670 inches, 42.42mm
LMR Ultra Flex Cable Codes – Stranded center conductor & thermoplastic rubber jacket for maximum flexibility.
LMR 195-Ultra OD=0.195 inches, 4.95mm
LMR 240-Ultra OD=0.240 inches, 6.10mm
LMR 400-Ultra OD=0.405 inches, 10.29mm
LMR 600-Ultra OD=0.590 inches, 14.99 mm
LMR 75 Ohm Cable Codes
LMR 240-75 OD=0.240 inches, 6.10mm
LMR 400-75 OD=0.405 inches, 10.29mm
LMR 600-75 OD=0.590 inches, 14.99mm
Times LMR Specialized product, Light Weight LMR, Fire Retardant version, Low Smoke, Military.
LMR-FR – Fire retardant cable for installation in building vertical risers or where fire retardancy is critical, both UL & CSA listed (CMR/CATVR).
LMR-DB – Watertight cables with an inert flooding compound injected in the braid to completely eliminate the possibility of any water migration, with a 10 year warranty.
LMR-PVC – Polyvinylchloride outer jacket for enhanced flexibility.
New LMR-SW low loss, low PIM high performance 50 Ohm coax cable with a seamless alumnium outer conductor, providing superior durability in bending compared to seam-welded cables and superior electrical performance compared to corrugated cables. Compared to corrugated cables, LMR-SW cable is lighter and provides significant cost savings. The easily field installed connectors have superior weather sealing, VSWR and consistent PIM performance. LMR-SW cables are the perfect solution for PIM-sensitive installations such as full duplex transmission lines and co-located sites. They are suitable for short to medium height tower runs and flexible enough to be used as jumper cables in cell-sites and other RF applications up to 6 GHz. The high quality type N and 716 DIN connectors are user friendly and provide excellent and reliable performance when installed with the easy-to-use cable prep tools. Typical PIM performance better than -170dBc can be achieved consistently. Groundign kits, hangers and other installation accessories are also available. Available cables;
CABLE SIZE OD ATTENUATION db/100 ft
LMR-SW396 0.450″ 2.06 @ 450 MHz
3.00 @ 900 MHz
4.41 @ 1800 MHz
LMR-SW540 0.610″ 1.46 @ 450 MHz
2.11 @ 900 MHz
3.06 @ 1800 MHz
LLSB – Low Smoke, Low Loss Military Shipboard Cables, qualified to MIL-DTL-17 specifications commencing with M17/220 200LLSB throught to M17/228 1700LLSB.
195LLSB – 0.195 inch/4.95 mm OD Low Smoke, Low Loss cable is now available from Times Microwave and stocked in Australia by Rojone.
LLSB Performance Specifications 1MB
Other LMR products in the Times range;
- nu-TRAC TRC-1250
- LMR Bundled Cable 2.5MB
- LMR
- Flexible Low Loss
- Light Weight LMR 1MB
- LMR-DB
- Watertight – Flexible Low Loss
- LMR-FR Fire Retardant ‘Riser’
- LMR-LLPL Fire Retardant ‘Plenum’
- LMR-Ultraflex Repeated Flexing
- LMR-7575 ohm
- Leaky Radiating Cables
- T-RAD Low Cost Radiating Cable
- nu-TRAC Triaxial Radiating Cable
- TCOM Low PIM, Low Loss, Low Temperature
- UTCOM-UF Ultra Flexible
- TCOM-SF Super Flexible
- FBT Low Loss High Power
- Broadband
- M17-127-RG393
- General Purpose – rugged environments
- LLSB Low Smoke
- -FR rugged environments
- LLSB Low Loss Low Smoke
- -FR rugged environments
- SF M17’s with lower loss & superior shielding
- SFT Low Loss
- TFlex Flexible Alternative to Semirigid
- CL Traditional Semirigid
- CL Low Loss Semirigid
- RAD Low Coast Radiating Cable 0.5MB
- nu-TRAC Radiating Cable 0.2MB
- TCOM Low PIM, Low Loss, Low Temperature
- TCOM-400-UltraFlex 0.2MB
- TCOM-600-UltraFlex 0.2MB
- TCOM-400-FlexStrand-DB 0.2MB
- TCOM-600-FlexStrand-DB 0.2Mb
- RG &MG17 – Times Microwave Full Coaxial Cable handbook 2MB
- StripFlex lower loss & superior shielding flexible coax cable
- StripFlex “SF”
- StripFlex II “SFT”
- TFlex Flexible Alternative to Semi-Rigid
- Shipboard High Power 1MB
Download Cable Performance Calculators
Loss & Power Calculator VSWR & Return Loss Calculators
Times LMR Coaxial Connectors
Times LMR Accessories, Hangers, Tooling, etc
Habia Cable is a leading global supplier of standard & custom wire & electrical cables including equipment wire, twisted wire, signal cables, coaxial cables and triaxial cables for industrial, commercial, defence, nuclear and communications applications.
Stocked in their most popular Coax cable TZC-500-25 Silver plated, double shielded offering excellent loss & intermodulation characteristics. This cable has been designed into most Nokia/Ericsson base station radio sets.
Trompeter Electronics produces RF interconnect end products, cross-connects, and related tools for the Telecom, Central Office, Broadcast, Military Aerospace, and Instrumentation markets worldwide. In addition, the company has a broad line of patch panel insertion-controlled interconnect modules.
Semi Rigid Coax Cables
Military Standard Semi-Rigid Coax Cables
Cable Code | Nominal Imped. | Capac. pF/ft | Capac. pF/m | Dielec. Material | Conduct. Size (in.) & Type | Shield Type | Outer Dim. (in.) | Outer Dim. (mm.) | Weight (kg/100m) | Min. Bend Radius (in.) | Min. Bend Radius (mm.) | Notes |
---|---|---|---|---|---|---|---|---|---|---|---|---|
M17/129-RG401 | 50 | 29.6 | 97.1 | PTFE | 0.0641 SC | BC TUBE | 0.25 | 6.35 | 15.6 | 0.125 | 3.175 | SWEPT ATTN & SRL FROM 400-18,000MHZ |
M17/129-00001 | 50 | 29.6 | 97.1 | PTFE | 0.0641 SC | TC TUBE | 0.25 | 6.35 | 15.6 | 0.125 | 3.175 | TIN PLATED M17/129-RG401 |
M17/130-RG402 | 50 | 29.9 | 98.1 | PTFE | 0.0362 SCCS | BC TUBE | 0.141 | 3.58 | 5.12 | 0.075 | 1.905 | SWEPT ATTN & SRL FROM 500-20,000MHZ |
M17/130-00001 | 50 | 29.9 | 98.1 | PTFE | 0.0362 SCCS | TC TUBE | 0.141 | 3.58 | 5.12 | 0.075 | 1.905 | TIN PLATED M17/130-RG402 |
M17-130-00002 | 50 | 29.9 | 98.1 | PTFE | 0.362 NCCCS | BC TUBE | 0.141 | 3.58 | 5.12 | 0.075 | 1.905 | SWEPT ATTN & SRL FROM 500-20,000MHZ |
M17/130-00003 | 50 | 29.9 | 98.1 | PTFE | 0.0362 NCCCS | TC TUBE | 0.141 | 3.58 | 5.22 | 0.075 | 1.905 | TIN PLATED M17/130-00002 |
M17/130-00004 | 50 | 29.9 | 98.1 | PTFE | 0.362 SCCS | BC TUBE | 0.141 | 3.58 | 5.12 | 0.075 | 1.905 | SWEPT ATTN & SRL FROM 500-20,000MHZ |
M17/130-00005 | 50 | 29.9 | 98.1 | PTFE | 0.0362 SCCS | TC TUBE | 0.141 | 3.58 | 5.22 | 0.075 | 1.905 | TIN PLATED M17/130-00004 |
M17/130-00006 | 50 | 29.9 | 98.1 | PTFE | 0.362 NCCCS | BC TUBE | 0.141 | 3.58 | 5.12 | 0.075 | 1.905 | SWEPT ATTN & SRL FROM 500-20,000MHZ |
M17/133-RG405 | 50 | 32 | 105 | PTFE | 0.0201 SCCS | BC TUBE | 0.0865 | 2.2 | 2.28 | 0.05 | 1.27 | SWEPT ATTN & SRL FROM 500-20,000MHZ |
M17-133-00001 | 50 | 32 | 105 | PTFE | 0.0201 SCCS | TC TUBE | 0.0865 | 2.197 | 2.35 | 0.05 | 1.27 | TIN PLATED M17/130-RG405 |
M17/133-00006 | 50 | 32 | 105 | PTFE | 0.0201 SCCS | BC TUBE | 0.0865 | 2.197 | 2.28 | 0.05 | 1.27 | SWEPT ATTN & SRL FROM 500-20,000MHZ |
M17/133-00007 | 50 | 32 | 105 | PTEF | 0.0201 SCCS | TC TUBE | 0.0865 | 2.197 | 2.35 | 0.05 | 1.27 | TIN PLATED M17/133-00006 |
M17/151-00001 | 50 | 32 | 105 | PTFE | 0.0113 SCCS | BC TUBE | 0.047 | 1.194 | 0.6 | 0.05 | 1.27 | SWEPT ATTN & SRL FROM 500-20,000MHZ |
M17/151-00002 | 50 | 32 | 105 | PTFE | 0.0113 SCCS | TC TUBE | 0.047 | 1.194 | 0.6 | 0.05 | 1.27 | TIN PLATED M17/151-00001 |
Standard Cable | 0.087″ | 0.141″ |
CNC Fomers | 6.4 mm | 8 mm |
Radiuses | 10 mm | 10 mm / 12.5 mm |
Custom sizes available
Abbreviations
SC | Silver-Covered Copper |
SCCS | Silver-Covered Copper-Clad Steel |
NCCCS | Nickel-Covered Copper-Clad Steel |
BC TUBE | Bare Copper Tube |
TC TUBE | Tinned Copper Tube |
PTFE | Polytetrafluoroethylene |
LP-GPX-05-S 1000 – 2000MHz SMA, Lightning & Surge Protection
The LP-GPX-05-S high performance series is an exceptional DC pass design for protection of GPS receivers requiring up to 5Vdc power to be supplied on the center
pin.
While the RF path is DC blocked, the biased DC voltage protection circuit uses Solid State protection technology to provide unsurpassed surge performance. The LP-GPX-
05-S series offers outstanding Insertion Loss and Return Loss characteristics over the 1000-2000MHz band, making it suitable for protection of commercial and military GPS, as well as other applications in this band.
Unlike competitive protectors, the white bronze plated construction of the LP-GPX-05-S series eliminates potential galvanic corrosion issues and provides long life in hostile environments. The fully weatherized housing is sealed to IP65 allowing for outdoor as well as indoor
5 allowing for outdoor as well as indoor
installation.
LP-GPX-05-S 1000 – 2000MHz SMA, Lightning & Surge Protection
LP-GTX-05 TNC Series L1, L2 & L3 &GPS Lightning & Surge Protection
LP-GTX-05-T high performance series is an exceptional DC pass design for protection of GPS receivers requiring up to 5Vdc power to be supplied on the center pin.
While the RF path is DC blocked, the biased DC voltage protection circuit uses Solid State
Protection Technology to provide unsurpassed surge performance. The LP-GPSX-05-T series offers outstanding insertion loss and return Loss characteristics over the 1000-2000 MHz band, making it suitable for protection of commercial and military GPS, as well as other applications in this band.
LP-GTX-05 N Series L1, L2 & L3 & GPS Lightning & Surge Protection
LP-GTX-05-N high performance series is an exceptional DC pass design for protection of GPS receivers requiring up to 5Vdc power to be supplied on the center pin.
While the RF path is DC blocked, the biased DC voltage protection circuit uses Solid State
Protection Technology to provide unsurpassed surge performance. The LP-GPSX-05-N series offers outstanding insertion loss and return Loss characteristics over the 1000-2000 MHz band, making it suitable for protection of commercial and military GPS, as well as other applications in this band.
LP-GTR-D 7/16 DIN Series GPS Lightning & Surge Protection
LP-GTR-D is an exception broadband DC pass design for lightening protection applications requiring DC power to be supplied to the electronics. This is the perfect protection solution for distributed antenna systems, tower mounted amplifiers and GPS Systems and other applications requiring DC pass circuitry. These devices exhibit outstanding RF performance with high surge current handling from 50-550 Watts.
Fully weatherized housing meets IP67 standard allowing for both indoor and outdoor installation.
Rojone – GPS Product Guide
Rojone has a full range of GPS products, to download a copy of our GPS catalogue click on the link below.
GPS Cavity Band Pass Filters
Rojone’s AMA-055 cavity Band pass filter is a narrow band 5 resonant section filter designed specifically for pre-selection of GPS and DGPS satellite signals. This product is typically used to filter out unwanted Radio Frequency signals, which can interfere with good reception of the GPS/DGPS signal.
GPS Band Pass Filters
Rojone’s AMA-4330-1575-10N Band pass filter is a narrow band, high rejection filter designed specifically to filter out unwanted Radio Frequency signals which can interfere with good reception of the GPS/DGPS signal.
AMA-4330-1575-10N & AMA-4330-1555-50N BAND PASS FILTERS ROJONE
Rojone – GPS Product Guide
Rojone has a full range of GPS products, to download a copy of our GPS catalogue click on the link below.