Products & Services
-
Latest News
Site Wide Search
Select Your Language
Search Results
Data Cable – Cat 5, Cat 6, Cat 7
The fundamental importance of the Data Centres and the need to provide for daily increasing applications, transmission speeds and data storage, businesses are investing in the amount of equipment their Data Centres must support. Consequently, IT managers must design scalable Data Centres to support their future growth and potentially new technologies, while ensuring the best performance.
Rojone supplies high quality Data cables consist of Cat.5e to Cat.7A multi-cable, multi-pair and multi-core structures solid and matched work area cables.
All cables are fully compatible with the standard connecting hardware (i.e. RJ-45).
All products are available with FR-LSZH, PVC, PU and PE jackets combined with different optional shielding structures such as S/FTP, SF/UTP, F/UTP, U/FTP.
The cables are designed with optimised lay lengths, size, transmission performance and structures to enable peak high density data-centre cabling.
High-density cabling creates less congestion in pathways which means better cooling conditions in particular for PoE and PoE+ applications, lower installation time, minimises down time, accelerates recovery time, minimises site access by non-essential personnel, and allows place-and plug modular installation for Gigabit and up to 10 Gigabit applications.
PoE – Power over Ethernet
Power over Ethernet (PoE) technology describes a system to pass electrical power safely, along with data, on Ethernet cabling. The IEEE standard for PoE requires Category 5 cable or higher for high power levels, but can operate with category 3 cable for low power levels. Power is supplied in common mode over 2 or more of the differential pairs of wires found in the Ethernet cables and comes from a power supply within a PoE-enabled networking device such as an Ethernet switch or can be injected into cable run with a midspan power supply.
Rojone is pleased to present our new PoE DC injector with surge protection built-in. This unit features ultra fast  gas tubes and high current diodes for optimum performance. This is a must-have for all PoE devices for ultimate protection. This unit has been designed to be used with a huge variety of radio using up to 60vDC.
Tools & Calibration Kits
Astro Tool Corporation
Rojone is pleased to represent one of the US’s leading connector service & assembly tooling companys, Astro Tool Corporation.
Astro Tool’s huge range covers varied connector types from Military Circular 5015, D38999 Series, Mil-C-26482, 26500, 26636 to Mil-C-81511 Series to Rectangular connectors ARINC for Aerospace & Defense applications through to computer applications such as D Sub, Fiber Optic as well as specialised tooling specifically for medical applications.
Astro Tool offers a tool suitable for just about any MIL-C39029 Contact on the market today.
Astro Tooling Guide 14MB
Astro Crimp Tools 3-26Â 4MB
General Crimping information
Turret & Positioner Charts for M22520/1-01, /2-01 & /7-01
Heavy Duty Pneumatic Crimp Tools M22520/23-01
Other Indent Tools
Mil Spec Indent Crimp Tool Selection Charts
Pneumatic Indent Crimp Tools
Astro Medical Crimp Tools 4MB
Astro Special Purpose Crimp Tools 0.5MB
Astro C Frame Die Crimp Tools 2MB
Astro Tooling Kit 4MB
Astro Contact Insert-Extract Tooling 6MB
Contact Locking & Releasing Methods
Insertion & Removal Tool Selection Guide
By Contact Manufacture
By Military Standard
Plastic Insertion & Removal Tool Selection Chart
Special Service Tools for connectors
MIL-I-81969 Cross Reference Chart
Insertion & Remover Tool Illustrations
Times LMR Installation Tooling
Uniquely designed for the Times Microwave LMR Series of cable and connectors, Rojone is proud to stock the majority of tooling in Australia.
Wrenches, Deburr, Cutter and Tool Kits 1MB
Low Cost Crimp Coaxial RG cables Tool Kit – Rojone’s API-HT-330K
Handy kit to have around!
Radiall Tooling Selection
Radiall compliments its extensive connector range with a full suite of tooling such as Stripping Tools, Pointer Gauges, Solder & Assembly Tools, Installation Tools, Tool kits for Semi-rigid & flexible cables, crimp tools, torque wrenches, insertion & extraction tools & accessories.
Radiall Tooling Catalogue 2.5 MB
Radiall’s most popular range of Radiall Torque Wrenches R282
SMA Torque Wrench 8mm 80 to 120NCM – Suitable for Stainless Steel Body Connectors R-282320
SMA Torque Wrench 8mm 55 to 65 NCM – Suitable for Brass Body connectors R-282320-030
SMA 2.9 K Connector Torque Wrench 6.5mm 80 to 120 NCM R-282323
HellermannTyton
Application Tooling for Cable Ties
Application Tooling for Heat Shrinkable Tubing
Application Tooling for Non Shrinkable Tubing
Application Tooling for Identification
Application Tooling for Snappers
LMR Bundled Cable
LMR Bundled Cable
Times Microwave Systems specialises in the design & manufacture of high performance flexible, Low Loss, standard coaxial M17 cable, for RF transmission from HF through to Microwave frequencies DC to 46GHz.
As the exclusive Australian Agent Rojone is pleased to announce the introduction of LMR® Bundled Cable this is a spiral configuration of multiple LMR®-400 or smaller LMR® cables under a common polyethylene outer jacket. This innovative design acts as the perfect feeder cable for applications requiring multiple runs, such as on towers or building top sites. A unique, patented grounding fixture grounds the outer shields of each cable and a rugged end cap seals the bundle to prevent moisture ingress at the break-out point.
LMR © Bundled Cable can be supplied as complete assembly with break outs and connectors on both ends, and as a single ended assembly (base can be trimmed and terminated after installation on tower), or as a raw cable and accessories along with easy to use tools. Pictorial instructions and installation videos are available to assist in the installation of the accessories.
Features and Benefits:
- Less Cable Runs
- Fewer Ground Kits and Cable Clamps to Install
- Reduced Labour and Material Costs
- Rip cord for easy removal of outer jacket
- Inner cables labelled with an identifier every six inches
Standard Cables Include:
- LMR-BC240-4
- LMR-BC300-12
- LMR-BC240-9
- LMR-BC400-7
- LMR-BC240-9-LW-75
- LMR-BC400-9
- LMR-BC-240-12
- LMR-BC400-9-DB
EC-BC Series End Cap Kits
Times Microwave Systems offers weather seal break out caps for a number of the LMR bundled cables. These kits consist of a hard ABS plastic split shell with stainless steel screws, a silicone rubber split cushion and a silicone rubber gasket. The split cushion is formed over the inner cables and the shell is then positioned over the transition so that the end of the outer jacket of the cable is roughly in the middle of the shell.
Watch the video below to see how to install the EC-BC Series End Cap Kit.
http://www.youtube.com/watch?v=W0CmQJmX6Ew
DataGuard® from Belcom
DataGuard® coaxial cables are the industrial version incorporating various armour types according to application. The original high-performance network cables are protected by a layer of steel in the form of galvanised wire applied around the cable with an enhanced performance outer sheath for further protection.
For traditional industrial protection in fixed installations, single wire armour is used. For flexible and high vibration installations, galvanised steel wire braid is applied, and special applications of interlocking galvanised steel wire tape or overlapping steel tapes can be used for flexibility and rodent/termite protection.
RG223/U 50 Ohm
DataGuard® Armoured (SWA) MIL-C-1 JF 98% Braid LSZH Firefighter®
Electrical Properties
| Inner Conductor DC | 28.0Â | Ohm/LM |
| Outer Conductor DC | 8.0 | MOhm*km |
| Impedance | 50±2 | Ohm |
| Capacitance | 100 | pF/m |
| Velocity ratio | 99 | % |
| Screening effectiveness 100-900 MHz | 70 | dB |
Lightning Protection – Data
Data line lightning & surge protectors are used to protect sensitive equipment from lightning strikes and surges on the Ethernet data lines. With the introduction of faster standards like 100 and 1000 Base-T Ethernet, faster data speeds require the equipment manufacturers to use sensitive high speed components that require protection.
Designed for Cat8, Cat5e and Cat6 applications, we have a range of data line protections available in different power leaves. From low power modules typically used for hubs or client installations, to high power, 3 stage protection use for maximum surge protection.
One of the latest editions to this range is our 19” rack mounted 4, 12 and 24 port Cat5 or CAT6 10/100/1000 Base T Surge protectors with RJ45 connections affordably priced.
In addition to data line protection, we can also offer protection for your telephone, DSL, T1, RS422/485, RS232, 4-20mA Current loop, AC/DC and video applications.
CivEnEx, Sydney, May 2011
Rojone will be exhibiting the EziTrak GPS Security and Tracking System at this year’s CivEnEx Civil Engineering Exhibition. Held at Eastern Creek on May 18 & 19, EziTrak will be demonstrated on booth 1.
EziTrak is a low-cost, self-monitored security and tracking system suitable for all types of vehicles, cars, trucks, machinery, plant equipment, motorbikes and boats.
Contact us for more information or to obtain a free pass.
Â
.
Rojone achieves ISO9001:2008 certification
Press Release
Rojone Pty Ltd has been independently certified as complying with ISO9001:2008 Quality Management Standard. This covers Rojone’s core activities – the sale, distribution and design of radio frequency and telecommunications components.
Australian-owned Rojone has worked extensively to achieve this recognition. Rojone’s products cover a comprehensive range of devices from GPS vehicle tracking systems through to high performance commercial and military components.
Over its 30 years in business, Rojone has continually invested in high quality test equipment, machinery and technology. This capability has lead to the design and manufacture by Rojone of many unique products.
Rojone is proudly one of Australia’s top professional and military electronics, GPS, RF & telecommunications companies.
Times-Protect® LP-GTV-N Series
Times Microwave Systems introduces the new Times-Protect® LP-GTV-N series of DC pass RF lightning and surge protection products with an extended frequency operating band from DC to 7000MHz. This new bidirectional design with N type female/female or female/male connectors handles up to 150 watts of RF power and allows for up 72 volts of DC voltage to be supplied on the center pin of the coaxial cable.
The LP-GTV-N series is the perfect RF equipment protection solution for any application requiring DC voltage and current to power tower top mounted electronics. The LP-GTV-N product family is IP67 rated, suitable for outdoor as well as indoor installations and its white bronze plated housing ensures durability and long life.
Times-Protect® LP-GTV surge arrestors available are:
- LP-GTV-NFF (180Vdc/150W) DC-7000MHz GT N type F/F bi-directional, 180V
- LP-GTV-NFM (180Vdc/150W) DC-7000MHz GT N type M/F bi-directional, 180V
Times Protect LP-GTR Lightning & Surge Protection Products
The Times-Protect™ LP-GTR series of DC pass RF lightning and surge protection products has been further expanded for higher power handling needs. With the addition of the LP-GTR-N-35 series, the entire product range with either the type N or 716DIN interface will now handle 50, 210 or 550 watts. Designed to pass DC for applications requiring power to be supplied to the electronics, the LP-GTR series is the perfect protection solution for distributed antenna systems and tower mounted electronics. The LP-GTR product family is IP67 rated, bidirectional, suitable for outdoor as well as indoor installations and includes a universal grounding bracket. The N connector designs cover the entire frequency spectrum from DC through 3000MHz while the 716 DIN types can be used from DC through 2500MHz.
LP-GTR-N Series:
- LP-GTR-NFF (90Vdc/50W)
- LP-GTR-NFF-23 (230Vdc/210W)
- LP-GTR-NFF-35 (350Vdc/550W)
N Female connectors on both sides – bidirectional
- LP-GTR-NFM (90Vdc/50W)
- LP-GTR-NFM-23 (230Vdc/210W)
- LP-GTR-NFM-35 (350Vdc/550W)
N Male connector on one side & N Female – bidirectional
LP-GTR-D Series:
- LP-GTR-DFF (90Vdc/50W)
- LP-GTR-DFF-23 (230Vdc/210W)
- LP-GTR-DFF-35 (350Vdc/550W)
716 DIN Female connectors on both sides – bidirectional
- LP-GTR-DFM (90Vdc/50W)
- LP-GTR-DFM-23 (230Vdc/210W)
- LP-GTR-DFM-35 (350Vdc/550W)
716 DIN Male connector on one side & 716 DIN Female connector on the other side – bidirectional