Products & Services
-
Latest News
Site Wide Search
Select Your Language
Search Results
GPS Repeaters
Rojone has been a leader in GPS repeating systems for many years. Our first commercial low cost system was developed in the early 90’s, refined over the years and is now in huge demand & sold throughout the world.
As a result of our commercial success, we were asked to develop a high performance, reliable L1/L2 system for the RAAF in Australia. This project has been a huge success, with many systems installed Australia wide. These repeaters offer many benefits not only in the maintenance area but keeping aircraft ready for rapid deployment.
L1 Commercial GPS Repeater Kit
The L1 Commercial GPS Repeater Kit is our low cost commercial L1 1575MHz repeater kit. Designed to simply bring GPS signals indoors cost effectively for test labs and vehicle garages, it is ideal for timing applications.
GPS L1/L2 Fixed Repeater System
The GPS L1 L2 Fixed Repeater Systems series was developed as a high performance L1/L2 GPS repeater system for the Australian Air Force. Specifically designed for permanent installation, it overcomes operational difficulties providing reliable dual band coverage anywhere needed.
The system features a highly sensitive active receive antenna capable of tracking satellites down to 5 degrees elevation, efficient TX antenna over 100dB RF blocking cellular, VHF & UHF radio frequencies. A high performance RF amplifier with high rejection filters for both L1 and L2. The repeater incorporates its own 110-240VAC power supply for quick & easy set up.
Portable, Compact L1/L2 Portable GPS Repeater System
Designed for the military however ideal for a range of Applications. This portable system was designed for rapid deployment, the system can be set up in under 20 minutes to provide L1/L2 GPS coverage to a variety of military & civilian vehicles including aircraft while under cover or inside hangars.
This self-contained system, weighs no more than 38 Kgs. The IP65 rated military designed case contains all the system Components to provide quick & reliable L1/L2 GPS coverage for up to 15 meters in radius.
The ROJ-140 system features a highly sensitive active receive antenna capable of tracking satellites down to 5 degrees elevation. It incorporates high performance RF amplifiers with high rejection filters for both L1 & L2. It boosts efficient TX Antenna, over 100dB RF blocking cellular, VHF & UHF radio Frequencies. Truly portable, it operates on battery power or can be connected Mains power and features auto power supply detection & low battery alarm.
Mobile L1/L2 GPS Repeater System – for Armoured Personnel Carriers (APC) Military Applications
Rojone has recently added a New Mobile L1/L2 GPS Repeater product to its already extensive family of commercial and military systems. The ROJ-150B kit is specifically designed for troop carrying mobile platforms such as APC’s (Armoured Personnel Carriers).
The ROJ-150 system, when installed, will re-transmit the GPS L1/L2 band signals within the enclosed vehicle to provide adequate coverage to maintain personal GPS receivers on equipment and man packs.
FAQ: Are GPS Repeaters permitted in Australia?
GPS repeaters can be legal in Australia, but some restrictions and regulations must be followed to ensure compliance with the law.
The Australian Communications and Media Authority (ACMA) regulates the use of GPS repeaters in Australia, and it is important to comply with their regulations to avoid fines or legal action. In general, GPS repeaters are only legal if they meet specific requirements, such as:
- They must be designed to receive and re-transmit GPS signals without causing harmful interference to other wireless services.
- They must be licensed by the ACMA and operated in compliance with the conditions of the license.
- They must not be used to interfere with or disrupt GPS signals used by emergency services, aircraft, or other critical applications.
It is also important to note that GPS repeaters that are not properly licensed or operated in compliance with the ACMA regulations can cause harmful interference to other wireless services and disrupt GPS signals, which can have serious consequences. Therefore, it is recommended to consult with the ACMA or a qualified professional before installing a GPS repeater in Australia.
Cellular Repeater CDMA, Next G
Information from ACMA
Mobile phone boosters/amplifiers, regardless of where they are intended to be used by third parties (i.e. not a mobile telecommunications carrier), are a prohibited device and cannot be legally used in Australia.
All radiocommunications transmitters operating in Australia, its territories and its territorial waters do so under the authority of an Australian Communications and Media Authority (ACMA) issued spectrum, apparatus or class license.
A mobile telephone booster/amplifier and/or repeater is a radiocommunications transmitter and therefore can only be operated in Australia under the authority of an ACMA issued radiocommunications license, or with the permission of the current licensees.
- The radio spectrum in which these mobile telephone booster/amplifiers and/or repeaters operate, is exclusively licensed to the mobile telephone carriers (including Telstra, Optus and Vodafone).
- There are no mobile telephone booster/amplifiers and/or repeaters licensed for use in Australia, with the exception of those operated by the mobile telephone carriers who may install and operate these or similar devices as part of their networks under their licenses.
- Third parties cannot be given licenses by the ACMA to operate mobile telephone booster/amplifiers and/or repeaters in this spectrum. You would need the permission of the licensees (the mobile telephone carriers.
There have been several instances where mobile telephone booster/amplifiers and/or repeaters have been imported into Australia from overseas and the subsequent use has resulted in interference to mobile telephone networks. ACMA has seized several of these devices and appropriate compliance enforcement action was taken under the Radiocommunications Act 1992.
Severe criminal penalties, including court imposed penalties up to $165,000.00 or 2 years imprisonment, exist under the Radiocommunications Act 1992 for the unlawful possession of and/or the use of these devices. Telecommunications carriers may also initiate civil legal action against users for any losses suffered due to the use of these devices the users may subsequently be able to take civil action against the suppliers.
Summary of mobile phone booster prohibition
You cannot legally use a booster or repeater for better mobile phone reception.
Reasons:
- A booster or repeater is classed as a transmitter.
- You need a licence to operate a transmitter.
- The booster would be re-transmitting in the same radio frequency spectrum covered by the Spectrum licences owned by the mobile service providers (the Carriers).
- You cannot legally transmit in the frequencies allocated to the carriers by their licences, without their permission.
Mobile phone boosters banned – Information for consumers:
http://www.acma.gov.au/theACMA/mobile-phone-boosters-banned-information-for-consumers
Alternatives:
Contact your mobile carrier (you mobile phone service provider) to ascertain if they are able to offer you any alternatives, or:
You might find the following alternatives suggested if you were to search on-line for solutions and information, depending on which is most suitable for your phone and situation:
- install a “car kit” for your home, or
- install an external antenna which is cable connected inside either directly to connector on the phone or via an inductive coupler if your phone is without provision for connection of an external antenna, or
- install a passive indoor antenna. Pick up some coaxial cable (enough to go from the outside of your home to the inside) and two antennas with coaxial connections from your nearest electronics store. Place your outside antenna in a location with a strong signal and run the cable into your home. Try running your cable through a window at first to make sure the passive antenna will help improve signal strength before you drill into your home. After connecting both the outdoor and indoor antennas check your signal strength, as it should be improved at this time.
You may still need to check with your Carrier or Service Provider (i.e. Telstra, Optus, 3, Vodafone, Virgin etc) to verify that these suggestions are acceptable under their Spectrum Licence conditions.
Rojone – GPS Product Guide
Rojone has a full range of GPS products, to download a copy of our GPS catalogue click on the link below.
High Performance Lightning Protectors with TNC interface
The Times-Protect® LP-GPX-05 high performance lightning protector series has been expanded with the availability of a TNC interface. These exceptional DC pass designs protect GPS receivers requiring up to 5Vdc power to be supplied on the center pin for L1, L2 and L3 bands.
While the RF path is DC blocked, the biased DC voltage protection circuit uses state-of-the-art solid state protection technology to provide unsurpassed surge performance.
The bidirectional filter based LP-GPX-05 protector with either a type N, TNC or SMA interface exhibits excellent insertion loss and return loss characteristics from 1000 to 2000 MHz.
The white bronze plating on the LP-GPX-05 protector eliminates potential galvanic corrosion issues and provides long life in hostile environments. The fully weatherised housing is rated to IP65 allowing for outdoor installations.
Times-Protect® GPX-05 surge arrestors available are:
- LP-GPX-05-SFF (Bidirectional design, SMA Female/SMA Female)
- LP-GPX-05-SFM (Bidirectional design, SMA Female/SMA Male)
- LP-GPX-05-NFF (Bidirectional design, N Female/ N Female)
- LP-GPX-05-NFM (Bidirectional design, N Female/N Male)
- LP-GPX-05-TNC (Bidirectional design, TNC Female/ TNC Female)
- LP-GPX-05-TNC (Bidirectional design, TNC Female/TNC Male)
Technical Data sheets are available at:
http://www.timesmicrowave.com/products/protect/downloads/GPX-S.pdf
http://www.timesmicrowave.com/products/protect/downloads/GPX.pdf
http://www.timesmicrowave.com/downloads/products/LP-GPX-05-T.pdf
Terminations/Loads
Rojone offers a comprehensive range of Terminations/Loads. Loads are used to effectively terminate unused outputs. A good load or termination is ideally perfectly matched to either 50 or 75 Ohm impedance to ensure the lowest possible return loss, meaning reflection back into your system. Rojone prides itself on offering quality loads and terminations, either designed and manufactured by Rojone or sourced via our exclusive supply arrangements with quality companies such as Radiall and Pasternack. The selection listed on our website is from the most popular series and products. Should you not find exactly what you need, please contact our helpful technical staff for assistance at sales@rojone.com.au
SELECTION GUIDE – Rojone Terminations
| Part Number | Description | Frequency | Ohms | Watts | Connector/Load |
|---|---|---|---|---|---|
| AMA-BN59 Series | Low PIM Loads | DC-3GHz & 694-3000MHz | 50 Ohms | 20, 50,100 & 200 Watts | 4.3-10 Series |
| R-404131-750 | DC-3 GHz | 50 Ohms | 2 Watts | N Male | |
| R-404170-111 | DC-4 GHz, 2 Watt, DIN 7/16 Male Load | DC-4 GHz | 50 Ohms | 2 Watts | DIN 7/16 Male |
| R-404175-111 | DC-4 GHz, 2 Watt, DIN 7/16 Female Load | DC-4 GHz | 50 Ohms | 2 Watts | DIN 7/16 Female |
| ROJ-LD111-01W | DC-6 GHz, 5 Watt, N Male Load | DC-6 GHz | 50 Ohms | 5 Watts | N Male |
| R-404507-000 | DC-2 GHz, 6 Watt, N Male Load | DC-2 GHz | 50 Ohms | 6 Watts | N Male |
| ROJ-LD211-01L | DC-4 GHz, 5 Watt, DIN 7/16 Male Load | DC-4 GHz | 50 Ohms | 5 Watts | DIN 7/16 Male |
| R-404514-000 | DC-4 GHz, 6 Watt, DIN 7/16 Male Load | DC-4 GHz | 50 Ohms | 6 Watts | DIN 7/16 Male |
| R-404567-000 | DC-12.4GHz, 12 Watts, N Male Load | DC-12.4 GHz | 50 Ohms | 12 Watts | N Male |
| R-404564-000 | DC-4 GHz, 12 Watts, DIN 7/16 Male Load | DC-4 GHz | 50 Ohms | 12 Watts | DIN 7/16 Male |
| R-404564-500 | DC-4 GHz, 12 Watt, DIN 7/16 Female Load | DC-4 GHz | 50 Ohms | 12 Watts | DIN 7/16 Female |
| R-404830 | DC-4 GHz, 50 Ohms, N Male 30 Watt Load | DC-4 GHz | 50 Ohms | 30 Watts | N Male |
| R-404840 | DC-4 GHz, 50 Ohms, N Male 50 Watt Load | DC-4 GHz | 50 Ohms | 50 Watts | N Male |
| R-404850 | DC-4 GHz, 50 Ohms, N Male 100 Watt Load | DC-4 GHz | 50 Ohms | 100 Watts | N Male |
| R-404847-118 | DC-2 GHz, Load 50 Ohms, DIN 7/16 Female, 50 Watts | DC-2 GHz | 50 Ohms | 50 Watts | DIN 7/16 Female |
| R-404857-118 | DC-2 GHz, Load 50 Ohms, DIN 7/16 Female, 100 Watts | DC-2 GHz | 50 Ohms | 100 Watts | DIN 7/16 Female |
| AMA-53010-30A | DIN 7/16 Male Termination | DC-6 GHz | 50 Ohms | 30 Watts | DIN 7/16 Male |
| AMA-5240CL-30W-30A | 800-2500 MHz, Economical Low PIM Cable load (PIM <150dBc), DIN 7/16 Male Plug, 50 Ohm, 30 Watts | 0.8-2.5 GHz | 50 Ohms | 30 Watts | DIN 7/16 Male |
| AMA-5240CL-100W-30A | 800-2500 MHz, Economical Low PIM Cable load (PIM <150dBc), DIN 7/16 Male Plug, 50 Ohm, 100 Watts | 0.8-2.5 GHz | 50 Ohms | 100 Watts | DIN 7/16 Male |
| AMA-5257 Series | 700-2700 MHz 4G LTE Low PIM Cable Loads (PIM <150dBc) | 0.7-2.7 GHz | 50 Ohms | 25, 30, 50 or 100 Watts | 4.3-10 Series, DIN 7/16 or N type Male or Female connectors |
| AMA-5247CL-100W-30A | 700-2700 MHz 4G LTE Economical Low PIM Cable Load (PIM <150dBc) | 0.7-2.7 GHz | 50 Ohms | 100 Watts | DIN 7/16 Male |
| AMA-5247CL-30W-30A | 700-2700 MHz 4G LTE Economical Low PIM Cable Load (PIM <150dBc) | 0.7-2.7 GHz | 50 Ohms | 30 Watts | DIN 7/16 Male |
| AMA-5247CL-100-45A | 700-2700 MHz 4G LTE Economical Low PIM Cable Load (PIM <150dBc) | 0.7-2.7 GHz | 50 Ohms | 100 Watts | 4.3-10 Male |
| AMA-53050-xxM | AMA-53050 Series Loads | DC-3 GHz | 50 Ohms | 50 Watts | DIN 7/16 or N Female |
| AMA-53100-xxM | AMA-53100 Series Loads | DC-3 GHz | 50 Ohms | 100 Watts | DIN 7/16 or N Female |
| AMA-54050-xxM | AMA-54050 Series Loads | DC-4 GHz | 50 Ohms | 50 Watts | DIN 7/16 or N Female |
| AMA-54100-xxM | AMA-54100 Series Loads | DC-4 GHz | 50 Ohms | 100 Watts | DIN 7/16 or N Female |
Rojone has an extensive R&D capability and welcomes custom design requirements. We are able to design and manufacture terminations quickly and cost effectively. Please contact sales@rojone.com.au with your specifications.
Radiall Terminations
RADIALL offers a wide range of SMA, N, SMB, SMC, BNC, BMA, SSMA, Space Qualified, QN, TNC, 7/16 , & QMA product ranging in power handing capabilities from 1 to 100 Watt and frequencies of DC to 40GHz in their connectorised termination range.
Radiall Full Terminations catalogue 2.2MB
Radiall Miniature Termination Selection 1MB – SMP, DIN 1.0/2.3, QMA, SMA 2.9, SMA, SMB, SMC, BMA, SSMA
Radiall Standard Coaxial Terminations 1.2MB – BNC, TNC, QN, N
Calibration Termination Set 1.0MB
7/16 DIN Terminations 1.0MB
European Military Approved Coaxial Terminations 1.0MB
Pasternack Terminations
Pasternack offer a huge selection of Terminations from Stock USA, delivery to Australian customers within 5 working days max.
75 Ohm BNC Female Terminations
?
New High Performance & Robust BMR-Spring Board-to-Board Connectors
As the exclusive distributor of Radiall products, Rojone is proud to introduce the addition of new high-performance and robust BMR-Spring large misalignment board-to-board connectors to their extensive offering of cost-effective subminiature RF coaxial solutions.
Radiall BMR-Spring connectors can handle a minimum board-to-board or rack and panel distance tolerance of at least 0.078” (2 mm) with custom misalignment of 3 mm or more. It also features a 6 degree tilt radial travel. It has an operating frequency range of DC-8 GHz, a 1.1 max VSWR guaranteed up to 3 GHz, and it can handle up to 350 watts of power at 2.7 GHz.
The Radiall BMR-Spring adapter features a unique non slotted spherical interface for improved electrical performance, high vibration and shock resistance, and an 80dB of shielding up to 3 GHz. A self-alignment mechanism makes the BMR-Spring particularly ruggedized for blind-mate applications. The spring-loaded adapters are symmetrical to avoid any assembly issues.
A typical BMR-Spring board-to-board system is made of three parts – slide-on receptacle, symmetrical adapter and snap-on receptacle. Custom configurations are also available for board-to-board, module-to-module, or rack and panel applications.
For further information on the BMR-Spring system, visit www.radiall.com or contact Rojone.
Category 7, 100 Ohm
600 MHz Data Transmission Cables
The GIGA-DOR Solution is a complete line of high-performance Cat. 7 horizontal and work area data cables, designed for CLASS F links and for advanced high data-rate networks, available in a wide range of constructions.
GIGA-DOR Solution cables conform to the ISO/IEC 11801 requirements for Cat. 7 cables as specified in IEC 61156-5 and 61156-6. These cables are composed of balanced twisted pairs having a nominal 100 Ohm characteristic impedance up to 600 MHz, with a very high NEXT loss.
The high NEXT loss, achieved by individual aluminium foil pair shields, provides a typical margin of 60 dB ACR over U/UTP cables, making GIGA-Solution cables ideal for multiple high-frequency services.
GIGA-DOR & GIGA-DOR Jr. S/FTP horizontal cables and GIGA-Patch 4 pair S/FTP 26 AWG work area (patch) cables are overall shielded with a tin-coated copper braid. When properly grounded, this copper braid and the individual aluminium foil shields provide exceptional EMC performance, having a minimum coupling attenuation of 90 dB.
All cables are available with flame-retardant PVC or halogen-free (HFFR) jackets, in a range of colors, in single or “Siamese” twin (FIG-8) constructions.
Category 7 Data Transmission Cables
| Part Number | Product Description | Computer & LAN Applications | Outer Jacket Material | Outer Jacket Material (mm nom.) |
|---|---|---|---|---|
| 9928244xxx | Cat. 7 4x2x26/7 AWG S/FTP Work Area FR-LSZH | High data rates | FR-LSZH | 6.4 |
| 9928264xxx | Cat. 7 4x2x26/7 AWG S/FTP Work Area PU | Outdoor installations | PU | 6.5 |
| 9928312xxx | Cat. 7 12x(4x2x26/7 AWG S/FTP) Multi-Cable Work Area FR-LSZH | Indoor Backbone | FR-LSZH | 27.8 |
| 9827A54xxx | Cat. 7 4x2x23/1 AWG F/FTP FRLSZH | Indoor use, fixed installations | FR-LSZH | 7.4 |
| 9928675xxx | Cat. 7 1000 MHz 4x2x23/1 AWG S/FTP FR-LSZH | Indoor use, fixed installations | FR-LSZH | 7.5 |
| 9928654xxx | Cat. 7 4x2x23/1 AWG S/FTP FRLSZH | Data-Centers/SANs | FR-LSZH | 8.0 |
| 9928554xxx | Cat. 7 4x2x22/1 AWG S/FTP FRLSZH | Indoor use, fixed installations | FR-LSZH | 8.2 |
| 9928692xxx | Cat. 7 2x(4x2x23/1 AWG) FIG-8 S/FTP FR-LSZH | Data-Centers/SANs | FR-LSZH | 8.0 |
| 9928604xxx | Cat. 7 4x2x23/1 AWG S/FTP FR-PVC | Indoor use, fixed installations | FR-PVC | 7.8 |
| 9928659xxx | Cat. 7 4x2x23/1 AWG S/FTP CSA Direct Burial PE | Outdoor and direct burial installations | PE | 12.0 |
Low Smoke Zero Halogen – LMR Cable
Times Microwave represented by Rojone in Australia is pleased to introduce LMR- LSZH (Low Smoke Zero Halogen LMR Cable), as a lower
cost alternative to LMR-FR cables when CMR rate is not required.
Advanced features and benefits:
- Low Smoke Low Toxicity Non-halogen
- Flame: Meets IEC-332-1-2, IEC 332-3 CAT.C, UL-VW1, UL-1581, IEE-383, BS-
4066-1, BS-4066-3, UL-1685, NFPA-130 - Smoke: Meets IEC-61034-2, NES-711
- Halogen: Meets IEC-60754-1, BS 6425-1, IEC-60754-2, BS 6425-2
- UV Resistant: Meets UL-1581, 720 Hour UV Exposure
- Non-UL Listed Cable
- LMR connector, install tools and hardware accessories can be directly used
| Size | Drawing No | MI Number | Order Code | |
|---|---|---|---|---|
| 195 | 11761 | 54387 | LMR-195-LSZH | Datasheet |
| 200 | 11762 | 54388 | LMR-200-LHZH | Datasheet |
| 240 | 11763 | 54389 | LMR-240-LSZH | Datasheet |
| 240 | 11827 | 54397 | LMR-240-75-LSZH | Datasheet |
| 400 | 11764 | 54390 | LMR-400-LSZH | Datasheet |
| 400 | 11828 | 54398 | LMR-400-75-LSZH | Datasheet |
| 500 | 11765 | 54391 | LMR-500-LSZH | Datasheet |
| 600 | 11766 | 54392 | LMR-600-LSZH | Datasheet |
| 600 | 11829 | 54399 | LMR-600-75-LSHZ | Datasheet |
Times Microwave Systems specialises in the design & manufacture of high performance flexible, Low Loss, semi-rigid & standard coaxial M17 cable, for RF transmission from HF through Microwave frequencies DC to 46GHz.
What is LMR Cable? Times LMR Cables are high performance, broadband, flexible, low loss 50 and 75 Ohm coaxial communications cables designed for use in wireless applications such as;
2 way land mobile, IEEE<802.11a & 802.11b, Cellular, Wireless local loop, PCS, LMDS, Wireless Internet (WISP), MMDS, Broadband wireless data, CLEC, Telemetry, Paging, and many more.
LMR is a complete system of cables, connectors, installation tools & accessories – everything you need to make your job simple and successful.
What is the advantage of LMR? Times LMR cables have RF performance comparable to traditional corrugated copper cables, but unlike corrugated cables, LMR is highly flexible, non-kinking and offers unsurpassed ease and speed of connection installation. Compared to RG type braided cables, LMR offers far lower loss & better RF Shielding.
Are the LMR Series Cables exclusive to Times Microwave? Yes. LMR is a registered Trademark of Times Microwave. The LMR Series is a family of high quality communications cables & accessories designed and manufactured by Times Microwave USA.
Times Microwave manufactures high quality products; all cables are maked with the company brand, LMR trademark and code. Please be aware of inferior imitation cables and assemblies sold unlawfully as LMR series products.
Times Microwave has exclusively appointed Rojone its Australian agent, with their full support . We are the authorised stockist for their LMR series Low Loss cables, accessories & Military coaxial cable & assembly range.
LMR Standard Cable Codes
LMR 100A OD=0.110 inches, 2.79 mm
LMR 195 OD=0.195 inches, 4.95 mm
LMR 240 OD=0.240 inches, 6.10 mm
LMR 400 OD=0.405 inches, 10.29 mm
LMR 600 OD=0.590 inches, 14.99 mm
LMR 900 OD=0.870 inches, 22.10 mm
LMR 1200 OD=1.200 inches, 30.48mm
LMR 1700 OD=1.670 inches, 42.42mm
LMR Ultra Flex Cable Codes – Stranded center conductor & thermoplastic rubber jacket for maximum flexibility.
LMR 195-Ultra OD=0.195 inches, 4.95mm
LMR 240-Ultra OD=0.240 inches, 6.10mm
LMR 400-Ultra OD=0.405 inches, 10.29mm
LMR 600-Ultra OD=0.590 inches, 14.99 mm
LMR 75 Ohm Cable Codes
LMR 240-75 OD=0.240 inches, 6.10mm
LMR 400-75 OD=0.405 inches, 10.29mm
LMR 600-75 OD=0.590 inches, 14.99mm
Times LMR Specialized product, Light Weight LMR, Fire Retardant version, Low Smoke, Military.
LMR-FR – Fire retardant cable for installation in building vertical risers or where fire retardancy is critical, both UL & CSA listed (CMR/CATVR).
LMR-DB – Watertight cables with an inert flooding compound injected in the braid to completely eliminate the possibility of any water migration, with a 10 year warranty.
LMR-PVC – Polyvinylchloride outer jacket for enhanced flexibility.
New LMR-SW low loss, low PIM high performance 50 Ohm coax cable with a seamless alumnium outer conductor, providing superior durability in bending compared to seam-welded cables and superior electrical performance compared to corrugated cables. Compared to corrugated cables, LMR-SW cable is lighter and provides significant cost savings. The easily field installed connectors have superior weather sealing, VSWR and consistent PIM performance. LMR-SW cables are the perfect solution for PIM-sensitive installations such as full duplex transmission lines and co-located sites. They are suitable for short to medium height tower runs and flexible enough to be used as jumper cables in cell-sites and other RF applications up to 6 GHz. The high quality type N and 716 DIN connectors are user friendly and provide excellent and reliable performance when installed with the easy-to-use cable prep tools. Typical PIM performance better than -170dBc can be achieved consistently. Groundign kits, hangers and other installation accessories are also available. Available cables;
CABLE SIZE OD ATTENUATION db/100 ft
LMR-SW396 0.450″ 2.06 @ 450 MHz
3.00 @ 900 MHz
4.41 @ 1800 MHz
LMR-SW540 0.610″ 1.46 @ 450 MHz
2.11 @ 900 MHz
3.06 @ 1800 MHz
LLSB – Low Smoke, Low Loss Military Shipboard Cables, qualified to MIL-DTL-17 specifications commencing with M17/220 200LLSB throught to M17/228 1700LLSB.
195LLSB – 0.195 inch/4.95 mm OD Low Smoke, Low Loss cable is now available from Times Microwave and stocked in Australia by Rojone.
LLSB Performance Specifications 1MB
Other LMR products in the Times range;
- nu-TRAC TRC-1250
- LMR Bundled Cable 2.5MB
- LMR
- Flexible Low Loss
- Light Weight LMR 1MB
- LMR-DB
- Watertight – Flexible Low Loss
- LMR-FR Fire Retardant ‘Riser’
- LMR-LLPL Fire Retardant ‘Plenum’
- LMR-Ultraflex Repeated Flexing
- LMR-7575 ohm
- Leaky Radiating Cables
- T-RAD Low Cost Radiating Cable
- nu-TRAC Triaxial Radiating Cable
- TCOM Low PIM, Low Loss, Low Temperature
- UTCOM-UF Ultra Flexible
- TCOM-SF Super Flexible
- FBT Low Loss High Power
- Broadband
- M17-127-RG393
- General Purpose – rugged environments
- LLSB Low Smoke
- -FR rugged environments
- LLSB Low Loss Low Smoke
- -FR rugged environments
- SF M17’s with lower loss & superior shielding
- SFT Low Loss
- TFlex Flexible Alternative to Semirigid
- CL Traditional Semirigid
- CL Low Loss Semirigid
- RAD Low Coast Radiating Cable 0.5MB
- nu-TRAC Radiating Cable 0.2MB
- TCOM Low PIM, Low Loss, Low Temperature
- TCOM-400-UltraFlex 0.2MB
- TCOM-600-UltraFlex 0.2MB
- TCOM-400-FlexStrand-DB 0.2MB
- TCOM-600-FlexStrand-DB 0.2Mb
- RG &MG17 – Times Microwave Full Coaxial Cable handbook 2MB
- StripFlex lower loss & superior shielding flexible coax cable
- StripFlex “SF”
- StripFlex II “SFT”
- TFlex Flexible Alternative to Semi-Rigid
- Shipboard High Power 1MB
Download Cable Performance Calculators
Loss & Power Calculator VSWR & Return Loss Calculators
Times LMR Coaxial Connectors
Times LMR Accessories, Hangers, Tooling, etc
Habia Cable is a leading global supplier of standard & custom wire & electrical cables including equipment wire, twisted wire, signal cables, coaxial cables and triaxial cables for industrial, commercial, defence, nuclear and communications applications.
Stocked in their most popular Coax cable TZC-500-25 Silver plated, double shielded offering excellent loss & intermodulation characteristics. This cable has been designed into most Nokia/Ericsson base station radio sets.
Trompeter Electronics produces RF interconnect end products, cross-connects, and related tools for the Telecom, Central Office, Broadcast, Military Aerospace, and Instrumentation markets worldwide. In addition, the company has a broad line of patch panel insertion-controlled interconnect modules.
Category 6A, 100 Ohm
500 MHz Data Transmission Cables
Giga-Ten Solution cables is a complete line of data-transmission horizontal and work area cables, designed for state-of-the-art cabling systems including Class EA of ISO/IEC 11801 and Cat. 6A of IEC 61156-5/6.
These cables are tested up to 650 MHz, and are fully compatible with the ISO/IEC 11801, IEC 61156-5, IEC 61156-6, and TIA/EIA 568C.
Cat. 6A cables come in the following designs:
- U/FTP cables grounded, where high AXT, NEXT and FEXT attenuation values are achieved by individual pair shielding
- U/FTP cables ungrounded, where high AXT, NEXT and FEXT attenuation values are achieved by individual pair shielding. These cables may be terminated with non-shielded connecting hardware with out any performance or EMC issues
- F/FTP cables, where high AXT, NEXT and FEXT attenuation values are achieved by both overall and individual pair aluminium foil shields
- S/FTP cables, where high AXT, NEXT and FEXT attenuation values are achieved by both overall copper braid and individual pair aluminium foil shields. This structure is recommended for PoE (Power over Ethernet) applications
Giga-Ten Cat. 6A Solution cables have Coupling Attenuation complying with Type II and Type I (depending on shield design) requirements per IEC 61156-5/6 therefore AXT performance is proven by design.
The cable’s high values of PS-ACR and PS-ELFEXT attenuation, and a stable 100 Ohm characteristic impedance ensuring very low Return-Loss, make it ideal for 1 and 10 GIGABIT-Ethernet applications.
All cables are available with a PVC or Flame Retardant Low-Smoke Zero-Halogen (FR-LSZH \ HFFR) jackets as well as other compounds, and in single or “Siamese twin” (FIG-8) constructions.
Category 6A Data Transmission Cables
| Part Number | Product Description | Computer & LAN Applications | Outer Jacket Material | Outer Diameter (mm nom.) |
|---|---|---|---|---|
| 9828U22xxx | Cat. 6A 4x2x26/7 AWG U/FTP Ungrounded U/UTP use Workarea FRLSZH | High bandwidth digital applications with low BER | FR-LSZH | 6.1 |
| 9828U61xxx | Cat. 6A 4x(2x24/1 AWG) U/FTP ungrounded FR-LSZH | Indoor use, fixed installations | FR-LSZH | 6.4 |
| 9828U71xxx | Cat. 6A 4x(2x24/1 AWG) U/FTP ungrounded FR-PVC | Indoor use, fixed installations | FR-PVC | 6.4 |
| 9828G22xxx | Cat. 6A 4x2x26/7 AWG U/FTP Work Area FR-LSZH | High bandwidth digital applications with low BER | FR-LSZH | 6.0 |
| 9828G24xxx | Cat. 6A 4x2x0.45/1 mm U/FTP Work Area FR-LSZH | High bandwidth digital applications with low BER | FR-LSZH | 6.3 |
| 83U0204xxx | Cat. 6A 4x2x23/1 AWG U/FTP Ungrounded U/UTP use FR-LSZH | Indoor use, fixed installations | FR-LSZH | 7.4 |
| 83UM204xxx | Cat. 6A 4x2x23/1 AWG U/FTP Ungrounded U/UTP use FR-LSZH IEC 60332-3 | Indoor use, fixed installations | FR-LSZH | 8.0 |
| 83G0204xxx | Cat. 6A 4x2x23/1 AWG U/FTP FR-LSZH | Indoor use, fixed installations | FR-LSZH | 7.3 |
| 83G0208xxx | Cat. 6A 2x(4x2x23/1 AWG) FIG-8 U/FTP FR-LSZH | Indoor use, fixed installations | FR-LSZH | 7.3 |
| 83GU204xxx | Cat. 6A 4x2x23/1 AWG U/FTP Indoor/Outdoor FR-LSZH/HFFR-PU | Indoor/Outdoor use, fixed installations | FR-PVC | 9.0 |
GPS Active 2 Way Power Divider for L1/L2 & GLONASS with DC Injector
This device is an active 2 way divider designed for vehicle application allowing the signal from a single GPS antenna to be shared between two receivers. The unit is configured to insert 5 Volts DC to the antenna via the three pin power connector, while the output ports are DC loaded to Simulate current draw draw. DC is blocked to the 2 output ports, supplied to the input port.
GPS 2 & 4 Way Splitter / Dividers
Medium Power, L Band 1200-1650 MHz, Port 2 DC Blocked
Rojone’s AMA-2300-XN Series of power dividers are specifically designed for GPS applications.
Output 1 is AC coupled to the input while Output 2 is DC coupled to allow for two receivers to a single active antenna. The receiver connection to the power divider’s DC path will be able to pass DC to the antenna. The DC current capability is > 500mA.
L1/L2 Splitters are also available; please contact Rojone Pty Ltd.
Miniature GPS 2 & 4 Way Splitter / Dividers
Rojone’s AMA-2251-1400 Series of miniature dividers are specifically designed for space critical GPS applications. One output is AC coupled to the input while the other is DC coupled to allow for two receivers to a single active antenna. The receiver connection to the power divider’s DC path will be able to pass DC to the antenna. The DC current capability is > 500mA.
GPS 6 Way Splitter / Dividers
AMA-2301-6N is specifically designed for L1, L2 and GLONSS receivers. This divider incorporates 6 diodes to provide DC through from each output to the antenna with 20dB Isolation; this allows any one port to supply DC while the diodes block the other ports. Six resistors apply a DC load to allow the GPS receivers to operate.
Miniature GPS 8 Way GPS Splitter / Dividers
Rojone’s AMA-2251-8MS is a miniature 8 way dividers are specifically designed for space critical GPS applications. One output is AC coupled to the input while the other is DC coupled to allow for two receivers to a single active antenna. The receiver connection to the power divider’s DC path will be able to pass DC to the antenna. The DC current capability is > 500mA
Rojone – GPS Product Guide
Rojone has a full range of GPS products, to download a copy of our GPS catalogue click on the link below.
Category 6, 100 Ohm
250 MHz Data Transmission Tables
The GIGA-STAR Solution is a complete line of data-transmission cables horizontal and work area types, designed for Cat. 6 and Cat. 5e for use in CLASS D and CLASS E cabling systems.
GIGA-STAR cables are tested up to 300 MHz, and are fully compatible with ISO/IEC 11801, IEC 61156-5, IEC 61156-6, and TIA/EIA 568C.
The GIGA-STAR Solution is consists of the following three groups:
- U/UTP cables, where high NEXT and FEXT loss values are achieved by mechanical pair separation
- U/FTP cables, where high NEXT and FEXT loss values are achieved by individual pair shielding
- S/FTP cables, where an additional overall braid shield provides outstanding EMC performance
Our customers have the option of selecting a true Category 6 cable that meets all the transmission parameters required to support the advanced applications with 3 different levels of EMC performance:
- U/UTP cables: 50 dB coupling attenuation
- U/FTP cables: 75 dB coupling attenuation
- S/FTP cables: 85 dB coupling attenuation
All GIGA-STAR cables feature high values of PS-ACR and PS-ELFEXT, and a stable 100 Ohm characteristic impedance ensuring very low Return-Loss, making The GIGA-STAR Solution ideal for GIGABIT-Ethernet applications. All cables are available with a PVC or Flame Retardant Low-Smoke Zero-Halogen (FR-LSZH \ HFFR) jacket and in a single or “Siamese twin” (FIG-8) construction.
Category 6 Data Transmission Cables
| Part Number | Product Description | Computer & LAN Applications | Outer Jacket Material | Outer Diameter (mm nom.) |
|---|---|---|---|---|
| 720KZ04xxx | Cat. 6 4x2x24/7 AWG U/UTP Work Area PVC | High bandwidth digital applications with low BER | FR-PVC | 6.5 |
| 9828022xxx | Cat. 6 4x2x26/7 AWG U/FTP Work Area PVC | High bandwidth digital applications with low BER | FR-PVC | 6.3 |
| 9828026xxx | Cat. 6 4x2x26/7 AWG S/FTP Work Area PVC | High bandwidth digital applications with low BER | FR-PVC | 6.4 |
| 750AZ04xxx | Cat. 6 4x2x23/1 AWG U/UTP PVC | Indoor use, fixed installations | FR-PVC | 6.7 |
| 750BZ04xxx | Cat. 6 4x2x23/1 AWG U/UTP FRLSZH | Data-Centers/SANs | FR-LSZH | 6.6 |
| 750BZR4101 | Cat. 6 4x2x23/1 AWG U/UTP SWA Outdoor Direct Burial LSZH | Trunk Cable for Local Area Networks | UV resistant PO compound | 12.7 |
| 750UZ04xxx | Cat. 6 4x2x23/1 AWG U/UTP Indoor/Outdoor FR-LSZH/FR-LSZH | Low temperature Indoor/Outdoor applications | FR-LSZH | 8.3 |
| 8300204xxx | Cat. 6 4x2x23/1 AWG U/FTP FRLSZH | Indoor use, fixed installations | FR-LSZH | 7.3 |
| 8300804xxx | Cat. 6 2x(4x2x23/1 AWG) FIG-8 U/FTP FR-LSZH | Trunk Cable for Local Area Networks | FR-LSZH | 7.6 |
| 8300904101 | Cat. 6 4x2x23/1 AWG U/FTP Outdoor LSZH | Indoor/Outdoor use, fixed installations | FR-LSZH | 9.6 |
| 8300C04101 | Cat. 6 4x2x23/1 AWG U/FTP CSA FR-LSZH/PE | Outdoor and direct burial installations | UV Resistant FR-PO | 13.2 |
| 830D104xxx | Cat. 6 4x2x23/1 AWG U/FTP Drop PVC | Trunk Cable for Local Area Networks | UV resistant FR-PVC | 7.4 |