Products & Services
-
Latest News
Site Wide Search
Select Your Language
Search Results
Prep Tool for LMR-195 and LMR-200 Low Loss Coaxial Cables
Rojone is pleased to introduce Times Microwave Systems’ newly-released CST-195/200 All-In-One Combination Prep Tool for use with both LMR-195 and LMR-200 low loss coaxial cables. The new tool provides the following features and advantages:
- Combination feature allows preparation of both LMR-195 and LMR-200 cables for either straight or right angle crimp connector attachment
- Suitable for use with all LMR-195 and LMR-200 connectors
- Provides consistently sharp cut of dielectric for best VSWR performance
- Rugged, lightweight construction
- Lanyard attachment included
- Requires use of separate debur tool (DBT-U)
Contact Rojone today for pricing.
IW Insulated Wire
Founded in 1970, IW developed a unique PTFE lamination process and applied it to manufacturing wire and cable. This process allowed IW to manufacture products of unprecedented reliability along with smaller diameters. Combining the new lamination process along with a patented shield design allowed IW to become one of the leaders in low loss microwave transmission lines, utilizing both solid and expanded PTFE dielectrics. In 1988, IW expanded its operations and created a Microwave Products Division.
Today, IW designs and manufactures a wide range of cables to support demanding customer application specific requirements for high-performance cable assemblies operating at frequencies up to 67GHz, across a range of diameters from .050? to 0.500? diameter. IW also offers a broad selection of connectors in order to provide our customers the proper cable assembly for specific applications. IW operates in two facilities. Headquarters and cable manufacturing are located in Bayport, NY. The Microwave Products Division, responsible for the sales of all microwave assemblies, is located in Bethel, CT. Both are ISO 9001:2008 certified with AS9100.
IW serves a broad range of both military and commercial markets. These include telecommunications, data links, satellite systems, airborne electronic warfare and countermeasures, missile systems, UAV applications, avionics and instrumentation, fire control systems, medical electronics, and geophysical exploration.
All cable assemblies are built to customer specification using the most advanced equipment and procedures including IPC-WHMA-A-620 trained technicians for soldering. All assemblies are tested for VSWR and insertion loss before leaving the factory. Phase matching, amplitude matching, and time delay measurements up to 67 GHz are available when required. We can provide either in-house or an external laboratory for environmental testing such as humidity, salt spray, vibration, thermal shock, flex testing, as well as other unique requirements. Engineering support is also available for optimal cable/ connector configuration in rack systems, black boxes, and other packaging areas where transmission line performance is critical to the overall system performance.
Rojone
A new addition to our in-building family of products is our broad-band, Low PIM coaxial DC Blocks designed ideal for connection to the input of a network combiner.
AMA-5357-30MF – Low PIM Coax DC-Block 80 to 3800 MHz Inner & Outer
Pasternack
Pasternack DC Blocks are primarily used to protect DC-sensitive RF circuitry in applications where DC power might exist on a transmission line or where a DC power spike might be generated. The DC Blocks operate to 18 GHz and are available in inner-only, outer-only and inner/outer DC block configurations.
50 Ohm SMA Male to SMA Female, 10MHz to 18GHz
50 Ohm N Male to N Female, 10MHz to 18GHz
50 Ohm BNC Male to BNC Female, 10MHz to 4GHz
50 Ohm TNC Male to TNC Female, 10MHz to 18GHz
50 Ohm 2.92mm Male to 2.92mm Female, 10MHz to 26.5GHz
75 Ohm 75 Ohm BNC Male to 75 Ohm BNC Female, 100MHz to 4GHz
75 Ohm 75 Ohm N Male to 75 Ohm N Female, 100MHz to 4GHz
50 Ohm 2.4mm SMA Male to 50 Ohm 2.4mm Female 100MHz to 50GHz
F Male to FÂ Female, 10MHz to 2GHz
.
TFlex – Ideal for In-Cabinet & On board Interconnection
Times Microwave have recently introduced new TFlex cable assemblies up to 26.5GHz/40GHz:
Radiall R2CT Connection Kit
Intra-Flex RF Interconnects
Intra-Flex high performance, low loss, in-the-box RF Interconnects
- Low loss improves performance
- Braid design maintains shielding when flexed and bent
- True flexible cable simplifies and eases installation
- Eliminates solder joint failures
- Buy as Assemblies or Cable and Connectors
- Short lead time
Parabolic Dish Antennas
The HyperGain model A-PDA5158-28 is a high performance broadband solid dish antenna designed to operate from 5.1GHz to 5.8GHz (5125-5850 MHz). The wide band design of this antenna eliminates the need to purchase different antennas for each frequency. This simplifies installation since the same antenna can be used for a wide array of wireless applications. This antenna features 287 dBi of gain with a 6° beam-width. It can be oriented for either vertical or horizontal polarisation.
This product is a suitable alternative to Andrews PX2F-52-NXA (Andrews is a registered trademark of CommScope).
Survey Products
Rojone is proudly the sole Australian stocking representative for Satel Finland, high performance & ultra-reliable Radio Modems, both licenced & unlicensed options.
Survey catalogue (4.35MB)
To complement our premium range of Radio Modems & in collaboration with industry leading positioning, surveying & machine control professionals, we have designed and manufactured a comprehensive selection of antennas, mountings & support products such as assemblies, cables & connectors to satisfy our surveying, positioning and machine control customers.
A Yagi antenna is a directional antenna consisting of a driven element such as dipole or folded dipole, Â a parasitic elements, Â a reflector and one or more directors.
A Yagi antenna is used for distance communications, typically 4 to 8 Km point to point.
A-Y3-3 UHF 400-520MHz, 6dB 3 Element Yagi Antenna
A-Y3-6Â UHF 400-520MHz 6 Element Yagi Antenna.
A-Y3-9 UHF 400-520 MHz 9 Element Yagi Antenna
A-Y46Â UHF 400-520MHz, BW6%, 9dBd Forward Gain Stainless Steel Yagi Antenna
A-Y470-625-12DBI Yagi wideband antenna, 12dBi gain, 470-625 MHz.
SY303 Yagi directional antenna, 6.5 dBd gain, 380-475 MHz.
SY307 Yagi directional antenna, 10 dBd gain, black anodized, 340-512 MHz.
SY3072 Yagi directional antenna, 12.5 dBd gain, dual, black anodized, 340-512 MHz.
SY3074 Yagi directional antenna, 15 dBd gain, black anodized, quad, 340-512 MHz.
SY307R Yagi directional antenna, 10 dBd gain, radome enclosed, HD, 406-470 MHz.
SY350 Yagi directional antenna, 7 dBd gain, broad band, 406-512 MHz.
Yagi Antennas 700-1000MHz Antenna
The Yagi antenna range is robustly constructed to be high performance for critical and remote installations.
They are manufactured either from 6060TS grade aluminums alloy and powder coated, or from 316 grade stainless steel, with all antenna’s being TIG & MIG welded.
6Â Element A-Y4-6 700-1000Mhz, 930MHz Typical, 80MHz BW, 9dBd Forward Gain Yagi Antenna
9 Element A-Y4-9 700-1000Mhz, 930MHz Typical, 80MHz BW, 12dBd Forward Gain Yagi Antenna
15 Element A-Y4-15 700-1000Mhz, 930MHz Typical, 80MHz BW, 14dBd Forward Gain Yagi Antenna
Yagi Directional Antenna
SY406 746-985 MHz Yagi directional antenna, 10 dBd gain, black anodized,
SY4062 806-966 MHz Yagi directional antenna, 13 dBd gain, dual,
SY406R 806-960 MHz Yagi directional antenna, 10 dBd gain, radome, HD,
SY415 902-956 MHz Yagi directional antenna, 12 dBd gain,
SY450 746-960 Mhz Yagi directional antenna, 6.5 dBd gain,