Products & Services
-
Latest News
Site Wide Search
Select Your Language
Search Results
Data Line Surge Protectors
Times Microwave Systems has recently introduced a new range of Data Line Surge Protectors. These products offer a unmatched level of data integrity and over-voltage protection, the LP-DOE-1G, LP-POE-1G and LP-PAE-100 Data Line surge protection devices are the newest additions to the Times-Protect® product family. Proprietary circuitry results in surge let-through voltage on data lines of less than 20V peak at 3kA 8x20uS surge test current and less than 10V peak at 100A 10x1000uS surge test current, while complying with extended RFC2544 test methods for data integrity. These extremely difficult tests are conducted on two protection devices separated by 100 meters of Cat 5e cable over a broad temperature range measuring these parameters:
Items available:
- LP-DOE-1G 1000 BASE-T ETHERNET DATA ONLY – 1000 Base-T / Indoor application with all data pin protected to chassis ground
- LP-POE-1G 1000 BASE-T POWER OVER ETHERNET – Power Over Ethernet, 1000 Base-T with up to 60Vdc injector. All pin pairs protected to chassis ground
- LP-PAE-100 100 BASE-T POWER AND ETHERNET – 00 Base-T with all pins protected to ground. Data pin pairs are (1-2) (3-6) and DC pin pairs are (4-5) (7-8)
The RFC2544 test results for each of these outstanding devices are available for download on the Times Microwave Systems website.
Enhanced RFC 2544 Test
| Part Number | Description | Frequency | Watts | Steps | Connector/Load |
|---|---|---|---|---|---|
| AMA-BN59 Series | Low PIM Loads | DC-3GHz & 694-3000MHz | 20, 50,100 & 200 Watts | 4.3-10 Series | |
| AMA-605 Series | Various 3, 5, 10, 20 30 & 30dB attenuator | DC-4 GHz | 25-200 Watts | 4.3-10 Series | |
| AMA-9305013-XX | High Power Attenuator, 3, 6, 10, 20 or 30dB Values | DC-3 GHz | 50 Watts | N Types | |
| AMA-9305030-XX | High Power Attenuator, 3, 6, 10, 20 or 30dB Values | DC-3 GHz | 50 Watts | DIN 7/16 Types | |
| AMA-9310013-XX | High Power Attenuator, 3, 6, 10, 20 or 30dB Values | DC-3 GHz | 100 Watts | N Types | |
| AMA-9402513-XX | High Power Attenuator, 1, 3, 6, 10, 20, 30dB | DC-4GHz | 25 Watts | N Type | |
| AMA-9310030-XX | High Power Attenuator, 3, 6, 10, 20 or 30dB Values | DC-3 GHz | 100 Watts | DIN 7/16 Types | |
| AMA-9xxxCA Series | Cable Attenuator, High Power 100 Watts, Low PIM <150dBc, 50 Ohm | Please specify when ordering | 100 Watts | Please specify when ordering | |
| AMA-154-35 | Miniature SMA Dip Switch Selectable, DC to 6 GHz Attenuator, SMA M-F Connectors | DC-6 GHz | 0-35dB in 1dB Steps | SMA Male - SMA Female Connectors | |
| AMA-154-35F | Miniature SMA Dip Switch Selectable, DC to 6 GHz Attenuator, SMA F Connectors | DC-6 GHz | 0-35dB in 1dB Steps | SMA Female Connectors | |
| ROJ-154-35-TNC | WaterProof IP66 Rated, Dip Switch Selectable, DC to 6 GHz Attenuator, TNC Connectorised | DC-6 GHz | 0-35dB in 1dB Steps | TNC Connectorised | |
| ROJ-154-35-N | WaterProof IP66 Rated, Dip Switch Selectable, DC to 6 GHz Attenuator, N Connectorised | DC-6 GHz | 0-35dB in 1dB Steps | N Connectorised | |
| ROJ-154-11-N | 11dB Variable Step Attenuator, N-type Male and Female Connectors | DC-6 GHz | 0-11 dB in 1dB Steps | N Male - N Female Connectors |
Rojone has an extensive R&D capability and welcomes custom design requirements. We are able to design & manufacture attenuators quickly & cost effectively.
Please contact sales@rojone.com.au with your specifications.
Pasternack RF Coaxial attenuators
Pasternack range of RF coaxial attenuators include continuously variable attenuators, DC bias attenuators, fixed attenuators and step attenuators models. These RF attenuators are available in 50 Ohm and 75 Ohm impedance variations. There series of coaxial attenuators are available in 2.4mm, 2.92mm, 7/16 DIN, 7mm, BNC, F, N, SMA and TNC connectors. RF dB attenuation values for these Pasternack attenuators range from 0 dB to 110 dB. The frequency range of Pasternack RF attenuators is from DC to 50 GHz. This product line includes low to high power attenuators which have power handling that ranges from 0.5 Watts to 500 Watts.
Pasternack RF coaxial attenuators include male and female genders and can be bi-directional and directional, depending on the power rating. There RF attenuators are manufactured to precise industry specifications and the bodies are constructed of an aluminium finned heatsink, stainless steel or nickel plated brass. Pasternack uses Pi attenuators or Pi pads for its inline RF attenuator designs.
Pasternack Attenuator Range
- 2.9mm
- 7/16 DIN
- 7mm
- BNC
- F Type
- N Type
- SMA
- TNC
- Programmable Attenuators
- Step Attenuators Push Button Style
- Step Attenuators Rotary Dial
- Step Attenuators Toggle Switch
- Variable Attenuators
Radiall Attenuators
Full catalogue including technical notes 1.65MB
SMA22_Handout_WEB – Robust attenuators with improved RF performance up to 22GHz<
Radiall have been a market leader in design and manufacturing Attenuators for many years.
High reliability Space Qualified attenuators have also been designed & built to satisfy the stringent demands and are qualified by ESA/SCC.
The most popular devices are stocked by Rojone in Sydney. The selection includes;
Miniature Attenuators 1.0MB
QMA, DC-3GHz, 1 Watt
SMA, most popular DC-18GHz, Flat frequency response high performance 2 watt devices although a full range of SMA in various values, power levels & sizes are available.
SMA 2.9mm DC-40 GHz, 100% compatible with K (TM of Wiltron)
Standard Attenuators – Various attenuation Values
BNC, DC-2GHz, DC-3GHz, DC-8GHz, 1& 2 Watts
TNC, DC-2GHz, DC-2GHz, DC-12.5GHz, 1, 2, 25, 30, 50, 88, 100 Watts
QN, DC-3GHz, 1 Watt
N, DC-2GHz, DC-3GHz, DC-12.4GHz, DC-18GHz, 1, 2, 10, 15, 25, 30, 50, 80 & 100 Watts
7/16 DIN, DC-3GHz, DC-4GHz, 1, 25, 50 & 100 Watts
Exhibition – Radio Comms Connect
Rojone will be exhibiting at this year’s Radio Comms Connect show –
Radio Comms Connect 2011
November 16-17
Etihad Stadium, Docklands, Melbourne
Rojone will be on booth 45
Contact us for further information – sales@rojone.com.au
 |  |  |
High performance range of Low Intermodulation (Low PIM<-140dBc typically) Directional and Omni-directional dome & panel antennas.
Dome antennas are available for ceiling or in-ceiling covert mounting & operate over the full 698 to 2700 MHz Frequency range, your quality antenna choice for In-Building Cellular applications.
Panel antennas MIMO dual polarised are ideal for GSM, CDMA, Wi-Fi, WiMAX and LTE systems.
Antennas
- A-460 Series, 800-3000 MHz Broadband, IBC Microcell Omni, Directional & In-ceiling Mount Antennas
- A-466 Series, 698-960 / 1710-3700 MHz Omni Directional Super Broad Band to 3.7 Ghz Antennas
- AI-467 Series, 698-2700 MHz Broadband Low PIM IBC MicroCell Omni, Directional & In-ceiling Mount Antenna
- AI-468, Dual-Polarised MIMO 1710-2700MHz & 700-960/1710-2700MHz Directional Panel Antenna
- AI-469, Dual-Polarised MIMO 1710-2700MHz & 800-960/1710-2700MHz Directional Panel Antenna
- A-480-RTA-9, 830-890 MHz High Gain Ground Independent Omni Directional Antenna
- A-490 Series, 800-1600MHz, 15MHz bandwidth tunable Mini-Dome antennas
- SA-SAA04-02038A ,870-960MHz 8dBi Gain Linear Polarised Panel Antenna N Female Connector
In-Ceiling Mount Antennas
A-470-ICM, 350-2500MHz In Ceiling Mount, Covert installation Broad Band Omni Directional Antenna 3-6dBi Gain.
GSM/Next G/3G Glass Mount Antennas
API-ANT475/485 & API-ANT490, GSM-850/900/1800/3G-2100MHz on glass mount antennas
Splitters/Dividers
AMA-2257-2N, 2 Way N Type Splitters
AMA-2257-2-716, 2 Way 7/16 Splitters Low PIM
AMA-2257-4N, 4 Way N type Splitter
AMA-2257-4-716, 4 Way 7/16 Splitters Low PIM
Couplers
AMA-1257-XX-N, Several values Couplers N Connectorised
AMA-1257-XX-716, Several values Couplers 7/16 Connectorised
Hybrid Coupler
AMA-1257-3HYB-716 3dB 700-2700MHz 4 Port Hybrid Coupler
Multi-Network Combiners
ROJ-074NMT-4-4-716 100 Watt 4 Inputs/4 Outputs, 700-2700MHz Frequency range, -150dBc Low PIM 716 Connectorised
Cable Loads, High Power, Low PIM < 150dBC
AMA-5257 Series Low PIM Cable Loads 700-2700 MHz 4G LTE, Small Cable Load, PIM <150dBc, DIN 7/16 Male, Female, N Male or Female 50 Ohms, 25, 30, 50 or 100 Watts
Rojone has just released its new range of broadband 4G LTE Cable Loads. These loads are compact, lightweight (<1kg) & high performance, neatly presented on a laser cut stainless steel frame for easy installation.
AMA-5247CL-100W-30A 700-2700 MHz 4G LTE, Economical Cable Load, LOW PIM <150dBc, DIN 7/16 Male Plug, 50 Ohm, 100 Watts
AMA-5247CL-30W-30A 700-2700 MHz 4G LTE, Economical Cable Load, LOW PIM <150dBC, DIN 7/16 Male Plug, 50 Ohm, 30 Watts
New High Performance & Robust BMR-Spring Board-to-Board Connectors
As the exclusive distributor of Radiall products, Rojone is proud to introduce the addition of new high-performance and robust BMR-Spring large misalignment board-to-board connectors to their extensive offering of cost-effective subminiature RF coaxial solutions.
Radiall BMR-Spring connectors can handle a minimum board-to-board or rack and panel distance tolerance of at least 0.078” (2 mm) with custom misalignment of 3 mm or more. It also features a 6 degree tilt radial travel. It has an operating frequency range of DC-8 GHz, a 1.1 max VSWR guaranteed up to 3 GHz, and it can handle up to 350 watts of power at 2.7 GHz.
The Radiall BMR-Spring adapter features a unique non slotted spherical interface for improved electrical performance, high vibration and shock resistance, and an 80dB of shielding up to 3 GHz. A self-alignment mechanism makes the BMR-Spring particularly ruggedized for blind-mate applications. The spring-loaded adapters are symmetrical to avoid any assembly issues.
A typical BMR-Spring board-to-board system is made of three parts – slide-on receptacle, symmetrical adapter and snap-on receptacle. Custom configurations are also available for board-to-board, module-to-module, or rack and panel applications.
For further information on the BMR-Spring system, visit www.radiall.com or contact Rojone.
EziTrak sponsors a car in Cancer Council’s Shitbox Rally
EziTrak® is thrilled to be involved with this year’s Shitbox Rally to raise money for The Cancer Council NSW.EziTrak® is sponsoring the Team Tonka Toys vehicle in this event.
The Shitbox Rally takes shitty cars and attempts to drive them across Australia, raising money for The Cancer Council along the way.This year’s rally will start in Melbourne on April 14, 2012 and end in Cairns on April 20.
As a GPS Security and Tracking System, EziTrak® is an ideal sponsor of the Team Tonka Toys vehicle and will be used by the team to track their progress up the east coast of Australia.EziTrak® is an Australian designed and manufactured monitoring, protection and GPS tracking system giving vehicle owners personalised, self-monitoring.This early warning anti-theft device is interactive and has no monthly or annual monitoring fees.
EziTrak® offers security, control, GPS tracking and emergency notification for a single one-off cost to vehicle owners.EziTrak® vehicle monitoring, protection and tracking system is available directly from Rojone.
The Cancer Council NSW is a community funded and focused cancer charity dedicated to the defeat of cancer.Tax-deductible donations to this event are welcomed at;
http://www.everydayhero.com.au/team_tonka_toys
LMR Bundled Cable
LMR Bundled Cable
Times Microwave Systems specialises in the design & manufacture of high performance flexible, Low Loss, standard coaxial M17 cable, for RF transmission from HF through to Microwave frequencies DC to 46GHz.
As the exclusive Australian Agent Rojone is pleased to announce the introduction of LMR® Bundled Cable this is a spiral configuration of multiple LMR®-400 or smaller LMR® cables under a common polyethylene outer jacket. This innovative design acts as the perfect feeder cable for applications requiring multiple runs, such as on towers or building top sites. A unique, patented grounding fixture grounds the outer shields of each cable and a rugged end cap seals the bundle to prevent moisture ingress at the break-out point.
LMR © Bundled Cable can be supplied as complete assembly with break outs and connectors on both ends, and as a single ended assembly (base can be trimmed and terminated after installation on tower), or as a raw cable and accessories along with easy to use tools. Pictorial instructions and installation videos are available to assist in the installation of the accessories.
Features and Benefits:
- Less Cable Runs
- Fewer Ground Kits and Cable Clamps to Install
- Reduced Labour and Material Costs
- Rip cord for easy removal of outer jacket
- Inner cables labelled with an identifier every six inches
Standard Cables Include:
- LMR-BC240-4
- LMR-BC300-12
- LMR-BC240-9
- LMR-BC400-7
- LMR-BC240-9-LW-75
- LMR-BC400-9
- LMR-BC-240-12
- LMR-BC400-9-DB
EC-BC Series End Cap Kits
Times Microwave Systems offers weather seal break out caps for a number of the LMR bundled cables. These kits consist of a hard ABS plastic split shell with stainless steel screws, a silicone rubber split cushion and a silicone rubber gasket. The split cushion is formed over the inner cables and the shell is then positioned over the transition so that the end of the outer jacket of the cable is roughly in the middle of the shell.
Watch the video below to see how to install the EC-BC Series End Cap Kit.
http://www.youtube.com/watch?v=W0CmQJmX6Ew
While Rojone manufactures a huge antenna range, we also are partnered with companies who are leaders internationally.
Radiall and COJOT offer a specialised range of Military antennas & custom designs to client specification;
Handheld Antennas
Flexible VHF Blade Antennas, fully over-molded Broadband Antennas
Tape Blade Antennas
Man Portable Antennas
VHF/UHF 90 degree configuration antennas
Monopole 100-512MHz with gooseneck
Tube Antennas
Small Form Factor Antennas
Whip Dipped Low Profile antennas for Unmanned Sensors UAV’s
Swivel Mount Dipoles 1400-1800MHz UAV & ground station as well as tactical data link antenna
Ruggedised Vehicular Antennas
VHF/UHF Antennas
Spring Mounted 1800 MHz Dual Band Colinear array antennas
Custom antennas
PMR Antennas for Homeland Security Applications
Smart Array Antennas, Beam Steered, Phased Array, Active & steering circuits, sectorial &
COJOT Antenna Brochure
NATO Band Solutions 2016
WB2245 Datasheet
R380000178 Radiall Broadband Overmoulded Whip Antenna 225 – 512 Mhz 10w (296 kb)
Radiall Defence & Military Antenna Solution guide 3.0MB
R380990016-Radiall-Vehicle-Antenna-Base-Mount-2014.pdf (498 kb)
The R380.990.016 Antenna is a 70W, Dipolar Design, Broadband Vehicular Antenna. The Phase-Center is located near the middle of the Tubular Radome. The antennae is Ground plane Independent Antenna that can be Mast-Mounted without particular impact on Electrical Performances.
Omni-Directional Jammer Discone Antenna (AE-JD-1018) 398KB
The AE-JD-1018 Jammer Discone Antenna is a rugged all weather model, enclosed in an ABS radome, uses all ultra corrosion resistant aluminium alloy and does not require any field tuning or adjustments. The compact size of the omni-directional antenna allows easy handling, shipping and is highly suitable for transmitting & receiving without having the requirement of multiple antennas.
Bicone Antenna, Active Receive 10MHz to 2GHz (ROJ-130-x) 616KB
The ROJ-130-X is an Active Bicone Antenna originally designed for the Australian Navy for shipboard applications. It is primarily used as an active receive antenna for signals between 10MHz & 1GHz or 10MHz & 2GHz (the frequency is determined by the amplifier selected by the customer).
The system consists of 3 main parts – the Antenna, Coaxial Cable, and Power Supply Module
Ruggedized Wide Band Omni Discone Antenna 75-3000 MHz
The AE-WD75-3000 is wide band heavy duty welded discone antenna is specially designed to survive extreme environmental conditions. Its low VSWR through the entire 75-3000 MHz band makes this discone antenna suitable as a high efficiency transmitting and receiving antenna.
This antennas superior performance meets the broadband requirement of a base station antenna for spectrum monitoring or jamming applications without the need of multiple antennas.
Wide Band Omni Direction Discone Antenna
The AE-AWD100-3000 wide band discone antenna is specially designed for Omni-Directional coverage. Due to its low VSWR through the entire band 100-3000MHz this discone can be used as a transmitting and receiving antenna.
Its high efficiency meets the broadband requirement of a base station antenna forspectrum monitoring or jamming applications without the need of multiple antennas.
The AE-AED100-3000 wide band discone antenna is ruggedized for all weather conditions and does not require any field tuning or adjustment. The compact size of this discone antenna allows for easy handling and has specially designed mounting hardware for fast installation. The wide band discone antenna when packed comes with the cone and disc elements removed from the antenna body for easy shipment.
UHF Vehicle Antenna
Radiall is proud to introduce a new UHF Vehicular Antenna for military applications. Embedded on terrestrial or marine vehicles, the robust design is engineered to withstand harsh environments without compromising electrical performance.
Radiall’s UHF Vehicular Antennas are ideal when excellent electrical performance and reliability is required.
The main benefits and features of these UHF Vehicular Antennas include:
- Excellent electrical performance
- High robustness & reliability
- Small form factor
Lightning Protection – Data
Data line lightning & surge protectors are used to protect sensitive equipment from lightning strikes and surges on the Ethernet data lines. With the introduction of faster standards like 100 and 1000 Base-T Ethernet, faster data speeds require the equipment manufacturers to use sensitive high speed components that require protection.
Designed for Cat8, Cat5e and Cat6 applications, we have a range of data line protections available in different power leaves. From low power modules typically used for hubs or client installations, to high power, 3 stage protection use for maximum surge protection.
One of the latest editions to this range is our 19” rack mounted 4, 12 and 24 port Cat5 or CAT6 10/100/1000 Base T Surge protectors with RJ45 connections affordably priced.
In addition to data line protection, we can also offer protection for your telephone, DSL, T1, RS422/485, RS232, 4-20mA Current loop, AC/DC and video applications.