Products & Services
-
Latest News
Site Wide Search
Select Your Language
Search Results
Low Smoke Zero Halogen – LMR Cable
Times Microwave represented by Rojone in Australia is pleased to introduce LMR- LSZH (Low Smoke Zero Halogen LMR Cable), as a lower
cost alternative to LMR-FR cables when CMR rate is not required.
Advanced features and benefits:
- Low Smoke Low Toxicity Non-halogen
- Flame: Meets IEC-332-1-2, IEC 332-3 CAT.C, UL-VW1, UL-1581, IEE-383, BS-
4066-1, BS-4066-3, UL-1685, NFPA-130 - Smoke: Meets IEC-61034-2, NES-711
- Halogen: Meets IEC-60754-1, BS 6425-1, IEC-60754-2, BS 6425-2
- UV Resistant: Meets UL-1581, 720 Hour UV Exposure
- Non-UL Listed Cable
- LMR connector, install tools and hardware accessories can be directly used
| Size | Drawing No | MI Number | Order Code | |
|---|---|---|---|---|
| 195 | 11761 | 54387 | LMR-195-LSZH | Datasheet |
| 200 | 11762 | 54388 | LMR-200-LHZH | Datasheet |
| 240 | 11763 | 54389 | LMR-240-LSZH | Datasheet |
| 240 | 11827 | 54397 | LMR-240-75-LSZH | Datasheet |
| 400 | 11764 | 54390 | LMR-400-LSZH | Datasheet |
| 400 | 11828 | 54398 | LMR-400-75-LSZH | Datasheet |
| 500 | 11765 | 54391 | LMR-500-LSZH | Datasheet |
| 600 | 11766 | 54392 | LMR-600-LSZH | Datasheet |
| 600 | 11829 | 54399 | LMR-600-75-LSHZ | Datasheet |
Times Microwave Systems specialises in the design & manufacture of high performance flexible, Low Loss, semi-rigid & standard coaxial M17 cable, for RF transmission from HF through Microwave frequencies DC to 46GHz.
What is LMR Cable? Times LMR Cables are high performance, broadband, flexible, low loss 50 and 75 Ohm coaxial communications cables designed for use in wireless applications such as;
2 way land mobile, IEEE<802.11a & 802.11b, Cellular, Wireless local loop, PCS, LMDS, Wireless Internet (WISP), MMDS, Broadband wireless data, CLEC, Telemetry, Paging, and many more.
LMR is a complete system of cables, connectors, installation tools & accessories – everything you need to make your job simple and successful.
What is the advantage of LMR? Times LMR cables have RF performance comparable to traditional corrugated copper cables, but unlike corrugated cables, LMR is highly flexible, non-kinking and offers unsurpassed ease and speed of connection installation. Compared to RG type braided cables, LMR offers far lower loss & better RF Shielding.
Are the LMR Series Cables exclusive to Times Microwave? Yes. LMR is a registered Trademark of Times Microwave. The LMR Series is a family of high quality communications cables & accessories designed and manufactured by Times Microwave USA.
Times Microwave manufactures high quality products; all cables are maked with the company brand, LMR trademark and code. Please be aware of inferior imitation cables and assemblies sold unlawfully as LMR series products.
Times Microwave has exclusively appointed Rojone its Australian agent, with their full support . We are the authorised stockist for their LMR series Low Loss cables, accessories & Military coaxial cable & assembly range.
LMR Standard Cable Codes
LMR 100A OD=0.110 inches, 2.79 mm
LMR 195 OD=0.195 inches, 4.95 mm
LMR 240 OD=0.240 inches, 6.10 mm
LMR 400 OD=0.405 inches, 10.29 mm
LMR 600 OD=0.590 inches, 14.99 mm
LMR 900 OD=0.870 inches, 22.10 mm
LMR 1200 OD=1.200 inches, 30.48mm
LMR 1700 OD=1.670 inches, 42.42mm
LMR Ultra Flex Cable Codes – Stranded center conductor & thermoplastic rubber jacket for maximum flexibility.
LMR 195-Ultra OD=0.195 inches, 4.95mm
LMR 240-Ultra OD=0.240 inches, 6.10mm
LMR 400-Ultra OD=0.405 inches, 10.29mm
LMR 600-Ultra OD=0.590 inches, 14.99 mm
LMR 75 Ohm Cable Codes
LMR 240-75 OD=0.240 inches, 6.10mm
LMR 400-75 OD=0.405 inches, 10.29mm
LMR 600-75 OD=0.590 inches, 14.99mm
Times LMR Specialized product, Light Weight LMR, Fire Retardant version, Low Smoke, Military.
LMR-FR – Fire retardant cable for installation in building vertical risers or where fire retardancy is critical, both UL & CSA listed (CMR/CATVR).
LMR-DB – Watertight cables with an inert flooding compound injected in the braid to completely eliminate the possibility of any water migration, with a 10 year warranty.
LMR-PVC – Polyvinylchloride outer jacket for enhanced flexibility.
New LMR-SW low loss, low PIM high performance 50 Ohm coax cable with a seamless alumnium outer conductor, providing superior durability in bending compared to seam-welded cables and superior electrical performance compared to corrugated cables. Compared to corrugated cables, LMR-SW cable is lighter and provides significant cost savings. The easily field installed connectors have superior weather sealing, VSWR and consistent PIM performance. LMR-SW cables are the perfect solution for PIM-sensitive installations such as full duplex transmission lines and co-located sites. They are suitable for short to medium height tower runs and flexible enough to be used as jumper cables in cell-sites and other RF applications up to 6 GHz. The high quality type N and 716 DIN connectors are user friendly and provide excellent and reliable performance when installed with the easy-to-use cable prep tools. Typical PIM performance better than -170dBc can be achieved consistently. Groundign kits, hangers and other installation accessories are also available. Available cables;
CABLE SIZE OD ATTENUATION db/100 ft
LMR-SW396 0.450″ 2.06 @ 450 MHz
3.00 @ 900 MHz
4.41 @ 1800 MHz
LMR-SW540 0.610″ 1.46 @ 450 MHz
2.11 @ 900 MHz
3.06 @ 1800 MHz
LLSB – Low Smoke, Low Loss Military Shipboard Cables, qualified to MIL-DTL-17 specifications commencing with M17/220 200LLSB throught to M17/228 1700LLSB.
195LLSB – 0.195 inch/4.95 mm OD Low Smoke, Low Loss cable is now available from Times Microwave and stocked in Australia by Rojone.
LLSB Performance Specifications 1MB
Other LMR products in the Times range;
- nu-TRAC TRC-1250
- LMR Bundled Cable 2.5MB
- LMR
- Flexible Low Loss
- Light Weight LMR 1MB
- LMR-DB
- Watertight – Flexible Low Loss
- LMR-FR Fire Retardant ‘Riser’
- LMR-LLPL Fire Retardant ‘Plenum’
- LMR-Ultraflex Repeated Flexing
- LMR-7575 ohm
- Leaky Radiating Cables
- T-RAD Low Cost Radiating Cable
- nu-TRAC Triaxial Radiating Cable
- TCOM Low PIM, Low Loss, Low Temperature
- UTCOM-UF Ultra Flexible
- TCOM-SF Super Flexible
- FBT Low Loss High Power
- Broadband
- M17-127-RG393
- General Purpose – rugged environments
- LLSB Low Smoke
- -FR rugged environments
- LLSB Low Loss Low Smoke
- -FR rugged environments
- SF M17’s with lower loss & superior shielding
- SFT Low Loss
- TFlex Flexible Alternative to Semirigid
- CL Traditional Semirigid
- CL Low Loss Semirigid
- RAD Low Coast Radiating Cable 0.5MB
- nu-TRAC Radiating Cable 0.2MB
- TCOM Low PIM, Low Loss, Low Temperature
- TCOM-400-UltraFlex 0.2MB
- TCOM-600-UltraFlex 0.2MB
- TCOM-400-FlexStrand-DB 0.2MB
- TCOM-600-FlexStrand-DB 0.2Mb
- RG &MG17 – Times Microwave Full Coaxial Cable handbook 2MB
- StripFlex lower loss & superior shielding flexible coax cable
- StripFlex “SF”
- StripFlex II “SFT”
- TFlex Flexible Alternative to Semi-Rigid
- Shipboard High Power 1MB
Download Cable Performance Calculators
Loss & Power Calculator VSWR & Return Loss Calculators
Times LMR Coaxial Connectors
Times LMR Accessories, Hangers, Tooling, etc
Habia Cable is a leading global supplier of standard & custom wire & electrical cables including equipment wire, twisted wire, signal cables, coaxial cables and triaxial cables for industrial, commercial, defence, nuclear and communications applications.
Stocked in their most popular Coax cable TZC-500-25 Silver plated, double shielded offering excellent loss & intermodulation characteristics. This cable has been designed into most Nokia/Ericsson base station radio sets.
Trompeter Electronics produces RF interconnect end products, cross-connects, and related tools for the Telecom, Central Office, Broadcast, Military Aerospace, and Instrumentation markets worldwide. In addition, the company has a broad line of patch panel insertion-controlled interconnect modules.
GPS Repeaters
Rojone has been a leader in GPS repeating systems for many years. Our first commercial low cost system was developed in the early 90’s, refined over the years and is now in huge demand & sold throughout the world.
As a result of our commercial success, we were asked to develop a high performance, reliable L1/L2 system for the RAAF in Australia. This project has been a huge success, with many systems installed Australia wide. These repeaters offer many benefits not only in the maintenance area but keeping aircraft ready for rapid deployment.
L1 Commercial GPS Repeater Kit
The L1 Commercial GPS Repeater Kit is our low cost commercial L1 1575MHz repeater kit. Designed to simply bring GPS signals indoors cost effectively for test labs and vehicle garages, it is ideal for timing applications.
GPS L1/L2 Fixed Repeater System
The GPS L1 L2 Fixed Repeater Systems series was developed as a high performance L1/L2 GPS repeater system for the Australian Air Force. Specifically designed for permanent installation, it overcomes operational difficulties providing reliable dual band coverage anywhere needed.
The system features a highly sensitive active receive antenna capable of tracking satellites down to 5 degrees elevation, efficient TX antenna over 100dB RF blocking cellular, VHF & UHF radio frequencies. A high performance RF amplifier with high rejection filters for both L1 and L2. The repeater incorporates its own 110-240VAC power supply for quick & easy set up.
Portable, Compact L1/L2 Portable GPS Repeater System
Designed for the military however ideal for a range of Applications. This portable system was designed for rapid deployment, the system can be set up in under 20 minutes to provide L1/L2 GPS coverage to a variety of military & civilian vehicles including aircraft while under cover or inside hangars.
This self-contained system, weighs no more than 38 Kgs. The IP65 rated military designed case contains all the system Components to provide quick & reliable L1/L2 GPS coverage for up to 15 meters in radius.
The ROJ-140 system features a highly sensitive active receive antenna capable of tracking satellites down to 5 degrees elevation. It incorporates high performance RF amplifiers with high rejection filters for both L1 & L2. It boosts efficient TX Antenna, over 100dB RF blocking cellular, VHF & UHF radio Frequencies. Truly portable, it operates on battery power or can be connected Mains power and features auto power supply detection & low battery alarm.
Mobile L1/L2 GPS Repeater System – for Armoured Personnel Carriers (APC) Military Applications
Rojone has recently added a New Mobile L1/L2 GPS Repeater product to its already extensive family of commercial and military systems. The ROJ-150B kit is specifically designed for troop carrying mobile platforms such as APC’s (Armoured Personnel Carriers).
The ROJ-150 system, when installed, will re-transmit the GPS L1/L2 band signals within the enclosed vehicle to provide adequate coverage to maintain personal GPS receivers on equipment and man packs.
FAQ: Are GPS Repeaters permitted in Australia?
GPS repeaters can be legal in Australia, but some restrictions and regulations must be followed to ensure compliance with the law.
The Australian Communications and Media Authority (ACMA) regulates the use of GPS repeaters in Australia, and it is important to comply with their regulations to avoid fines or legal action. In general, GPS repeaters are only legal if they meet specific requirements, such as:
- They must be designed to receive and re-transmit GPS signals without causing harmful interference to other wireless services.
- They must be licensed by the ACMA and operated in compliance with the conditions of the license.
- They must not be used to interfere with or disrupt GPS signals used by emergency services, aircraft, or other critical applications.
It is also important to note that GPS repeaters that are not properly licensed or operated in compliance with the ACMA regulations can cause harmful interference to other wireless services and disrupt GPS signals, which can have serious consequences. Therefore, it is recommended to consult with the ACMA or a qualified professional before installing a GPS repeater in Australia.
Cellular Repeater CDMA, Next G
Information from ACMA
Mobile phone boosters/amplifiers, regardless of where they are intended to be used by third parties (i.e. not a mobile telecommunications carrier), are a prohibited device and cannot be legally used in Australia.
All radiocommunications transmitters operating in Australia, its territories and its territorial waters do so under the authority of an Australian Communications and Media Authority (ACMA) issued spectrum, apparatus or class license.
A mobile telephone booster/amplifier and/or repeater is a radiocommunications transmitter and therefore can only be operated in Australia under the authority of an ACMA issued radiocommunications license, or with the permission of the current licensees.
- The radio spectrum in which these mobile telephone booster/amplifiers and/or repeaters operate, is exclusively licensed to the mobile telephone carriers (including Telstra, Optus and Vodafone).
- There are no mobile telephone booster/amplifiers and/or repeaters licensed for use in Australia, with the exception of those operated by the mobile telephone carriers who may install and operate these or similar devices as part of their networks under their licenses.
- Third parties cannot be given licenses by the ACMA to operate mobile telephone booster/amplifiers and/or repeaters in this spectrum. You would need the permission of the licensees (the mobile telephone carriers.
There have been several instances where mobile telephone booster/amplifiers and/or repeaters have been imported into Australia from overseas and the subsequent use has resulted in interference to mobile telephone networks. ACMA has seized several of these devices and appropriate compliance enforcement action was taken under the Radiocommunications Act 1992.
Severe criminal penalties, including court imposed penalties up to $165,000.00 or 2 years imprisonment, exist under the Radiocommunications Act 1992 for the unlawful possession of and/or the use of these devices. Telecommunications carriers may also initiate civil legal action against users for any losses suffered due to the use of these devices the users may subsequently be able to take civil action against the suppliers.
Summary of mobile phone booster prohibition
You cannot legally use a booster or repeater for better mobile phone reception.
Reasons:
- A booster or repeater is classed as a transmitter.
- You need a licence to operate a transmitter.
- The booster would be re-transmitting in the same radio frequency spectrum covered by the Spectrum licences owned by the mobile service providers (the Carriers).
- You cannot legally transmit in the frequencies allocated to the carriers by their licences, without their permission.
Mobile phone boosters banned – Information for consumers:
http://www.acma.gov.au/theACMA/mobile-phone-boosters-banned-information-for-consumers
Alternatives:
Contact your mobile carrier (you mobile phone service provider) to ascertain if they are able to offer you any alternatives, or:
You might find the following alternatives suggested if you were to search on-line for solutions and information, depending on which is most suitable for your phone and situation:
- install a “car kit” for your home, or
- install an external antenna which is cable connected inside either directly to connector on the phone or via an inductive coupler if your phone is without provision for connection of an external antenna, or
- install a passive indoor antenna. Pick up some coaxial cable (enough to go from the outside of your home to the inside) and two antennas with coaxial connections from your nearest electronics store. Place your outside antenna in a location with a strong signal and run the cable into your home. Try running your cable through a window at first to make sure the passive antenna will help improve signal strength before you drill into your home. After connecting both the outdoor and indoor antennas check your signal strength, as it should be improved at this time.
You may still need to check with your Carrier or Service Provider (i.e. Telstra, Optus, 3, Vodafone, Virgin etc) to verify that these suggestions are acceptable under their Spectrum Licence conditions.
Rojone – GPS Product Guide
Rojone has a full range of GPS products, to download a copy of our GPS catalogue click on the link below.
EziTrak sponsors a car in Cancer Council’s Shitbox Rally
EziTrak® is thrilled to be involved with this year’s Shitbox Rally to raise money for The Cancer Council NSW.EziTrak® is sponsoring the Team Tonka Toys vehicle in this event.
The Shitbox Rally takes shitty cars and attempts to drive them across Australia, raising money for The Cancer Council along the way.This year’s rally will start in Melbourne on April 14, 2012 and end in Cairns on April 20.
As a GPS Security and Tracking System, EziTrak® is an ideal sponsor of the Team Tonka Toys vehicle and will be used by the team to track their progress up the east coast of Australia.EziTrak® is an Australian designed and manufactured monitoring, protection and GPS tracking system giving vehicle owners personalised, self-monitoring.This early warning anti-theft device is interactive and has no monthly or annual monitoring fees.
EziTrak® offers security, control, GPS tracking and emergency notification for a single one-off cost to vehicle owners.EziTrak® vehicle monitoring, protection and tracking system is available directly from Rojone.
The Cancer Council NSW is a community funded and focused cancer charity dedicated to the defeat of cancer.Tax-deductible donations to this event are welcomed at;
http://www.everydayhero.com.au/team_tonka_toys
New High Performance & Robust BMR-Spring Board-to-Board Connectors
As the exclusive distributor of Radiall products, Rojone is proud to introduce the addition of new high-performance and robust BMR-Spring large misalignment board-to-board connectors to their extensive offering of cost-effective subminiature RF coaxial solutions.
Radiall BMR-Spring connectors can handle a minimum board-to-board or rack and panel distance tolerance of at least 0.078” (2 mm) with custom misalignment of 3 mm or more. It also features a 6 degree tilt radial travel. It has an operating frequency range of DC-8 GHz, a 1.1 max VSWR guaranteed up to 3 GHz, and it can handle up to 350 watts of power at 2.7 GHz.
The Radiall BMR-Spring adapter features a unique non slotted spherical interface for improved electrical performance, high vibration and shock resistance, and an 80dB of shielding up to 3 GHz. A self-alignment mechanism makes the BMR-Spring particularly ruggedized for blind-mate applications. The spring-loaded adapters are symmetrical to avoid any assembly issues.
A typical BMR-Spring board-to-board system is made of three parts – slide-on receptacle, symmetrical adapter and snap-on receptacle. Custom configurations are also available for board-to-board, module-to-module, or rack and panel applications.
For further information on the BMR-Spring system, visit www.radiall.com or contact Rojone.
LMR Bundled Cable
LMR Bundled Cable
Times Microwave Systems specialises in the design & manufacture of high performance flexible, Low Loss, standard coaxial M17 cable, for RF transmission from HF through to Microwave frequencies DC to 46GHz.
As the exclusive Australian Agent Rojone is pleased to announce the introduction of LMR® Bundled Cable this is a spiral configuration of multiple LMR®-400 or smaller LMR® cables under a common polyethylene outer jacket. This innovative design acts as the perfect feeder cable for applications requiring multiple runs, such as on towers or building top sites. A unique, patented grounding fixture grounds the outer shields of each cable and a rugged end cap seals the bundle to prevent moisture ingress at the break-out point.
LMR © Bundled Cable can be supplied as complete assembly with break outs and connectors on both ends, and as a single ended assembly (base can be trimmed and terminated after installation on tower), or as a raw cable and accessories along with easy to use tools. Pictorial instructions and installation videos are available to assist in the installation of the accessories.
Features and Benefits:
- Less Cable Runs
- Fewer Ground Kits and Cable Clamps to Install
- Reduced Labour and Material Costs
- Rip cord for easy removal of outer jacket
- Inner cables labelled with an identifier every six inches
Standard Cables Include:
- LMR-BC240-4
- LMR-BC300-12
- LMR-BC240-9
- LMR-BC400-7
- LMR-BC240-9-LW-75
- LMR-BC400-9
- LMR-BC-240-12
- LMR-BC400-9-DB
EC-BC Series End Cap Kits
Times Microwave Systems offers weather seal break out caps for a number of the LMR bundled cables. These kits consist of a hard ABS plastic split shell with stainless steel screws, a silicone rubber split cushion and a silicone rubber gasket. The split cushion is formed over the inner cables and the shell is then positioned over the transition so that the end of the outer jacket of the cable is roughly in the middle of the shell.
Watch the video below to see how to install the EC-BC Series End Cap Kit.
http://www.youtube.com/watch?v=W0CmQJmX6Ew
Lightning Protector Selection Guide
Rojone offers a range of lightning protection devices.
AMA-180 Low IM Lightning Protector – 800-2500 MHz
AMA-181 Low IM Lightning Protector – 400-520 MHz
N Connectorised Gas Arrestor
RJN-ST-N1N0 – Commercial DC to 5.8575 GHz N Male to N Female Arrestor
RJN-ST-N0N0 – Commercial DC to 5.8575 GHz N Female to N Female Arrestor
DIN 7/16 Connectorised Arrestor
ROJ-180A – Commercial 800-2500MHz DIN 7/16 Male to DIN 7/16 Female Connector
Should you not find what you are looking for, please contact us – sales@rojone.com.au
Times Microwave NEW Lightning Protection range
Times Microwave Systems has introduced its new, innovative Times-Protect™ line of surge and lightning protection products. These unique surge protection devices address applications throughout the entire useful RF frequency range from DC with capability up to and including 6 GHz.
Products available include:
LP-STR Series 800 MHz – 2500 MHz (DIN and N connector configurations), excellent passive intermodulation (PIM) performance, outstanding IL/RL characteristics, DC blocked for superior surge performance, high surge current rating, Broadband multi-strike design, high power rating over the entire frequency band & fully weatherised housing to IP67 standard.
LP-GTR Series DC – 3000 MHz (DIN and N connector configurations), DC pass, multi-strike capability, replaceable gas tube design, Broadband bidirectional performance, excellent IL/RL performance over the entire operating frequency band & fully weatherised housing to IP67 standard.
LP-BTR Series 125 MHz – 1000 MHz, DC blocking technology, excellent multi-strike performance, exceptional longevity, excellent multi-strike performance, outstanding IL/RL characteristics & superior surge performance.
LP-BTRW Series addresses applications in the 20MHz to 1000MHz spectrum. Weatherised to IP67 making it ideal for outdoor applications.
LP-BTRW-NFF – N Female connectors on surge and protected sides
LP-BTRW-NMP – N Male connector on protected side with N Female connector on surge side
LP-BTRW-NMS – N Male connector on surge side with N Female connector on protected side
Times Protect brochure 1.3MB
LP-GPX-05 Series now available with a type N, SMA, or TNC interface. Return loss characteristics from 1000 to 2000 MHz. Exceptional DC pass designs protect GPS receivers requiring up to 5Vdc power to be supplied on the center pin for L1, L2 and L3 bands. Fully weatherised housing is rated to IP65 allowing for outdoor installations.
LP-GPX-T Series offers outstanding Insertion Loss and Return Loss characteristics over the 1000-2000MHz band, making it suitable for protection of commercial and military GPS, as well as other applications in this band. Fully weatherised housing is rated to IP65 allowing for outdoor installations.
LP-GPX-05-TFF – TNC Female connectors on surge and protected sides – bidirectional
LP-GPX-05-TFM – TNC Male connector on one side & TNC Female connector on the other side – bidirectional
Radiall Professional Lightning Protection
Radiall has an extensive range of professional N & DIN 7/16, IP67, Quarter Wave Stub and Gas Discharge Lightning protection devices. Radiall’s arrestors are typically single band devices designed specifically for CDMA.
Pasternack Range
Pasternack stock a range of Surge Protectors.
Rojone – GPS Product Guide
Rojone has a full range of Lightning Protection, to download a copy of our GPS catalogue click on the link below.
While Rojone manufactures a huge antenna range, we also are partnered with companies who are leaders internationally.
Radiall and COJOT offer a specialised range of Military antennas & custom designs to client specification;
Handheld Antennas
Flexible VHF Blade Antennas, fully over-molded Broadband Antennas
Tape Blade Antennas
Man Portable Antennas
VHF/UHF 90 degree configuration antennas
Monopole 100-512MHz with gooseneck
Tube Antennas
Small Form Factor Antennas
Whip Dipped Low Profile antennas for Unmanned Sensors UAV’s
Swivel Mount Dipoles 1400-1800MHz UAV & ground station as well as tactical data link antenna
Ruggedised Vehicular Antennas
VHF/UHF Antennas
Spring Mounted 1800 MHz Dual Band Colinear array antennas
Custom antennas
PMR Antennas for Homeland Security Applications
Smart Array Antennas, Beam Steered, Phased Array, Active & steering circuits, sectorial &
COJOT Antenna Brochure
NATO Band Solutions 2016
WB2245 Datasheet
R380000178 Radiall Broadband Overmoulded Whip Antenna 225 – 512 Mhz 10w (296 kb)
Radiall Defence & Military Antenna Solution guide 3.0MB
R380990016-Radiall-Vehicle-Antenna-Base-Mount-2014.pdf (498 kb)
The R380.990.016 Antenna is a 70W, Dipolar Design, Broadband Vehicular Antenna. The Phase-Center is located near the middle of the Tubular Radome. The antennae is Ground plane Independent Antenna that can be Mast-Mounted without particular impact on Electrical Performances.
Omni-Directional Jammer Discone Antenna (AE-JD-1018) 398KB
The AE-JD-1018 Jammer Discone Antenna is a rugged all weather model, enclosed in an ABS radome, uses all ultra corrosion resistant aluminium alloy and does not require any field tuning or adjustments. The compact size of the omni-directional antenna allows easy handling, shipping and is highly suitable for transmitting & receiving without having the requirement of multiple antennas.
Bicone Antenna, Active Receive 10MHz to 2GHz (ROJ-130-x) 616KB
The ROJ-130-X is an Active Bicone Antenna originally designed for the Australian Navy for shipboard applications. It is primarily used as an active receive antenna for signals between 10MHz & 1GHz or 10MHz & 2GHz (the frequency is determined by the amplifier selected by the customer).
The system consists of 3 main parts – the Antenna, Coaxial Cable, and Power Supply Module
Ruggedized Wide Band Omni Discone Antenna 75-3000 MHz
The AE-WD75-3000 is wide band heavy duty welded discone antenna is specially designed to survive extreme environmental conditions. Its low VSWR through the entire 75-3000 MHz band makes this discone antenna suitable as a high efficiency transmitting and receiving antenna.
This antennas superior performance meets the broadband requirement of a base station antenna for spectrum monitoring or jamming applications without the need of multiple antennas.
Wide Band Omni Direction Discone Antenna
The AE-AWD100-3000 wide band discone antenna is specially designed for Omni-Directional coverage. Due to its low VSWR through the entire band 100-3000MHz this discone can be used as a transmitting and receiving antenna.
Its high efficiency meets the broadband requirement of a base station antenna forspectrum monitoring or jamming applications without the need of multiple antennas.
The AE-AED100-3000 wide band discone antenna is ruggedized for all weather conditions and does not require any field tuning or adjustment. The compact size of this discone antenna allows for easy handling and has specially designed mounting hardware for fast installation. The wide band discone antenna when packed comes with the cone and disc elements removed from the antenna body for easy shipment.
UHF Vehicle Antenna
Radiall is proud to introduce a new UHF Vehicular Antenna for military applications. Embedded on terrestrial or marine vehicles, the robust design is engineered to withstand harsh environments without compromising electrical performance.
Radiall’s UHF Vehicular Antennas are ideal when excellent electrical performance and reliability is required.
The main benefits and features of these UHF Vehicular Antennas include:
- Excellent electrical performance
- High robustness & reliability
- Small form factor
Contact Rojone
Feel free to contact Rojone using the details below. Alternatively, you can complete our contact form and we will respond as soon as possible; please complete all required fields.
Please note that we do not offer over-the-counter sales. If you wish to purchase antennas, connectors, cables/assemblies, or any other Rojone products in person, please get in touch with our sales staff to arrange an appointment.
Head Office
Address: 44 Aero Road, Ingleburn NSW 2565
Sydney AUSTRALIA
Postal Address: PO Box 1, Casula Mall NSW
2170 AUSTRALIA
Telephone: (+61) 02 9829 1555
Facsimile: (+61) 02 9605 8812
Email: sales@rojone.com.au
Sales Team:
Branch Offices
Perth
Warren Boucaut – WA State Sales Manager
Tel: 0407 426 233
Email: warren@rojone.com.au
Coaxial Assemblies
Presentations
Rojone has been manufacturing and selling high quality RF & microwave coaxial cable assemblies since 1981. We offer a comprehensive range of locally manufactured assemblies with an excellent range of high performance, low loss, extreme & military application products from Times Microwave USA and Radiall France.
Brands & Products
Rojone Assemblies
Rojone Cable Assembly catalogue (1.5 MB)
Our Production is equipped with the latest test instruments, Vector Network & Spectrum Analysers (HP8720D, HP8753B, 8495E), a Thermoline Thermal Chamber for temperature cycling cables, auxiliary items such as precision Schleuniger 207 and their latest CS5400 cable stripping machines, inspection microscopes, pin depth gauges and automated test software.
Times Microwave
TMS are the experts in their field with high performance RF & Microwave assemblies for the harshest of military, civil & test applications.
- SilverLine – Low Cost Flexible high performance Test Cables.
- Miltech – Extreme Environments hermetically sealed, low loss, low VSWR, phase stable and light weight options for airborne applications.
- Zero-DB – Zero Loss, integrated LNA for critical aircraft applications.
- SiO2 – Silicon Dioxide Extreme Environment military assemblies.
- Military Tactical Field Deployable Antenna Feeder cables – Designed to withstand the riggors of repeated reeling for harsh Environments.
- Heli-Foil – Low Loss High Performance Microwave Coaxial assemblies.
Radiall
Radiall offers a specialized range of RF & Microwave coaxial & multipin cable assemblies:
- Corrugate
- Flexible RG, KX, ECO, ECOX, LMR
- Flexible Ultra-Low Loss SHF
- Hand-Formable
- Semi-Rigid
- Space Qualified
- TestPro Bench Test
Pasternack
Pasternack offer an excellent commercial range of:
- Coaxial cable assemblies
- Patch Cords covering banana leads, alligator and spade leads
- Fibre Optic assemblies
L-com
L-com produces a range of High Performance Armoured Cable Assemblies that feature a stainless Steel Flexible Jacket. Built around a low loss coax cable that works to a range to 10 GHz, they are designed for use in the following applications;
- Harsh industrial environment
- High traffic production test systems
- Installations susceptible to rodent damage